592591
14
Zoom out
Zoom in
Previous page
1/28
Next page
14
Playback (continued)
Continuous playback
Continuous playback can be performed between TAPE 1 and
TAPE 2. When one tape is played back to the end, the other tape
automatically starts playback, in a relay fashion.
1
Load pre-recorded tapes into the TAPE 1 and TAPE 2
compartments.
2
Set the REV MODE switch to the p (CONT PLAY) position.
3
Press the PLAY (h or y) key of the deck you want to start
first.
You can start continuous playback from either TAPE 1 or TAPE 2.
Playback cycles through four tape sides as follows, and will
continue as many as 5 times when you start the playback from
Side “A” on TAPE 1, or until you stop the operation.
TAPE 1 Side“A w Side “B”
2 x
TAPE 2 Side “B” s Side “A”
RTZ (TAPE 1 only)
When you press the RTZ(1) key, the TAPE 1 deck fast-forwards or
rewinds the tape until the counter reads 0000, and then stops.
NOTE
o RTZ (Return-to-zero) only works on TAPE 1.
o If the counter position is too close to the 0000 mark (greater than
9994 or less than 0005), the RTZ function cannot be used.
A-B Repeat playback
1. During playback, press the REPEAT key at the point where
you want to start the repeat playback interval (A point).
RE01 appears on the display when this point is set.
2. Next, press the REPEAT key at the point where you want
to end the repeat playback interval (B point). RE02
appears on the display.
The tape automatically rewinds to the A point where
playback restarts. When the B point is reached, playback
stops temporarily, the tape rewinds again to the A point,
and playback continues to repeat.
3. Press the STOP (H) key to end repeat playback.
CAUTION
o During repeat playback, only the REPEAT and STOP keys can be
used.
o This function cannot be used for durations of less than 10 counts
on the tape counter between the starting and end points.
o Only intervals in the current playback direction can be repeated.
o Repeat playback stops automatically after 20 repetitions.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam 202MKVI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam 202MKVI in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info