630219

Targa CR 1.0A1 - IAN 106751 Dashcam Manual

42
Zoom out
Zoom in
Previous page
1/189
Next page
CR 1.0 A1
40 - English
Connecting the Dashboard Camera to a Computer
1. Use the USB cable supplied to connect the Dashboard Camera to a USB port on your
computer. To do so, insert the small plug of the supplied USB cable into the USB/charge port
(5) of your Dashboard Camera and the large plug into a USB port on your computer.
2. The Dashboard Camera will then turn on automatically and you will be asked to select either
"Mass Storage" or "PC Camera" mode.
3. Press the + (18) or – (17) button several times to select the "Mass Storage" function and press
the OK button (12).
The computer will now set up a removable disk that can be used to access your recordings.
When connecting to the PC via the USB cable, the content of the SD memory card will
be read-only. This means you will not be able to delete, rename or write to any files on
the Dashboard Camera from the PC. It is only possible to play previously recorded
content.
Using a card reader
If your computer has a card reader which is compatible with microSD or SD memory cards, you
can read the contents of the memory card directly. To do so, remove the memory card from the
Dashboard Camera while it is switched off.
1. Insert the microSD card directly into the microSD card reader or into the SD card adapter.
2. If you are using the SD card adapter, insert it into the SD card reader on your computer
(normally labelled SD/MMC).
3. The PC will add the memory card contents under the drive letter representing the card reader in
My Computer.
4. Open My Computer on your PC and double-click on the drive representing the card reader.
5. All recorded files can be found in various folders on this disk drive.
6. Now you can copy the recorded files from the memory card into a folder of your choice on the
computer’s hard disk.
Encoding videos for iOS
1. Copy the desired video file to your Apple computer. To do this, proceed as described in the
previous sections.
2. Open the video file context menu and select "Encode Selected Video Files".
3. In the menu that appears, click "Continue".
A new video file appears on the desktop.
… 42 …


Need help? Post your question in this forum.

Forumrules
1

Forum

targa-cr-1.0a1---ian-106751-dashcam

Reset search

  • Can I teplace battery in Targa CR1.0A1.It is possible to open the camera by cudtomer? Submitted on 17-5-2023 at 17:30

    Reply Report abuse

  • Been on charge over night, powered on and got message low power and shut down.....can you get a replacement battery for this camera...ta Submitted on 23-9-2018 at 11:51

    Reply Report abuse

  • My charger cable had broken and will not power the camera. Do you have replacement leads? Submitted on 15-2-2017 at 18:22

    Reply Report abuse

  • where can i get rechargible battery jinke li-ion jk 403035 measuring 30 by 30 mm,or similar for this dash cam. cr 1.0a1 Submitted on 11-2-2017 at 01:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Targa CR 1.0A1 - IAN 106751 Dashcam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Targa CR 1.0A1 - IAN 106751 Dashcam in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info