630219
27
Zoom out
Zoom in
Previous page
1/189
Next page
CR 1.0 A1
English - 25
Exposure compensation
You can define an exposure compensation value for photo capture.
1. With "Photo" mode selected, press the EV button (10) to bring up the exposure compensation
menu.
2. Using the + (18) and – (17) buttons, select the desired option and confirm by pressing the
OK button (12). While making your selection the preview image on the display (13) will
change in real time so that you can quickly see which exposure value is currently most
suitable.
You may choose an exposure value between – 2 and + 2 in 1/3 exposure value increments.
If the picture is too bright, select a negative value for exposure compensation.
If the picture is too dark, select a positive value for exposure compensation.
Playback
You can play back your recorded videos and photos on the screen to check if the results are
satisfactory. The recordings can also be played back on an HDMI-ready television (see also
"Viewing recordings on a television" on page 39).
To be able to play back the videos and photos, you must select the "Playback" option in the main
menu:
1. Power the Dashboard Camera on by pressing and holding the On/Off button (14) for approx.
3 seconds.
2. Press the + (18) or – (17) button several times until the "Playback" Menu is displayed.
3. Press the OK button (12) to enable Playback mode.
The last recorded file (video or photo) will now appear.
4. Press the + (18) or – (17) button several times until the recording you wish to play is selected.
If the selected recording is a video, the icon will appear at the top left of the screen. If the
selected recording is a photo, the icon will appear at the top left of the screen.
5. For video files, press the OK button (12) to start playback.
Video playback functions
The following functions are available while playing videos (a toolbar is shown at the bottom of the
screen with a guide to the available functions):
Pause: Press the OK button (12) to temporarily pause playback. Press the OK button (12) again
to continue playback.
27


Need help? Post your question in this forum.

Forumrules
1

Forum

targa-cr-1.0a1---ian-106751-dashcam

Reset search

  • Can I teplace battery in Targa CR1.0A1.It is possible to open the camera by cudtomer? Submitted on 17-5-2023 at 17:30

    Reply Report abuse
  • Been on charge over night, powered on and got message low power and shut down.....can you get a replacement battery for this camera...ta Submitted on 23-9-2018 at 11:51

    Reply Report abuse
  • My charger cable had broken and will not power the camera. Do you have replacement leads? Submitted on 15-2-2017 at 18:22

    Reply Report abuse
  • where can i get rechargible battery jinke li-ion jk 403035 measuring 30 by 30 mm,or similar for this dash cam. cr 1.0a1 Submitted on 11-2-2017 at 01:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Targa CR 1.0A1 - IAN 106751 Dashcam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Targa CR 1.0A1 - IAN 106751 Dashcam in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info