803910
10
Zoom out
Zoom in
Previous page
1/11
Next page
13 ENGLISH
Warranty
This product is covered with TaoTronics product and labor warranty for 12 months from the date of
its original purchase. If any problems occur, please contact the TaoTronics Customer Care Centre via
the contact information listed in this User Guide.
We can only provide after sales service for products that are sold by TaoTronics or TaoTronics
authorized retailers and distributors. If you have purchased your unit from a different place, please
contact your seller for return and warranty issues.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Remote control does not
respond to the lamp
Remote control is not paired
with your lamp automatically
The remote control is already
paired with your lamp
by default. If not, please
manually pair as instructed
below.
1. Press and hold both
buttons on Lamp Controller
for more than 1 second, both
lamps will flash indicating it is
under pairing mode now.
2. Press and hold the Power
button on Remote Control
until both lamps stay solid
on. Then your lamp is
successfully paired with the
remote control.
Clear Pairing History
Remote control is missing
or more than one remote
controls are connected
To disconnect the paired
remote control(s),
1. Press and hold both
buttons on Lamp Controller
for more than 1 second, both
lamps will flash.
2. To clear all pairing history,
press and hold the Main
Lamp button on Lamp
Controller for more than 3
seconds until both lamps
turn off.
3. To cancel one of the
remote controls, press and
hold the Power button on
Remote Control until both
lamps turn off.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TaoTronics TT-DL095 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TaoTronics TT-DL095 in the language / languages: English as an attachment in your email.

The manual is 0.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info