Manual TaoTronics TT-CM001 (page 9 of 43) (English, German, French, Italian, Spanish)

803867

Zoom out

Zoom in

1/43

11 Coffee Maker 12

Coffee Maker

Reservation for Brewing

Always align clock time with local time before setting the preset time.

1. In standby status, tap PROG button to enter reservation mode.

2. Tap HR/MIN button to set the preset time, and the time is conﬁrmed with blinking for 5s, then

start with BREW/AUTO OFF button.

3. Tap CARAFE TEMP button to set the keep-warm level. When the clock runs to the preset time,

it will start brewing automatically.

· When PROG light blinks, tapping PROG button or no operation in 10s will

exit the reservation settings.

· Tap PROG button again to show the preset time.

· Tap BREW/AUTO OFF button again to cancel the preset time.

Additional Features

1. Clock Settings

1. In standby status, tap HR/MIN button once to enter clock settings.

2. Tap HR/MIN button to increase 1 increment by each tap; Hold HR button to increase rapidly.

3. No operation in 5s indicates that clock setting is done.

2. Keep Warm Settings

2.1 Keep-warm time settings

Set the keep-warm time before setting the preset time as it cannot be

changed during brewing process.

1. In standby status, hold the CARAFE TEMP button to enter keep-warm time settings.

2. When AUTO OFF light is blinking, set the keep-warm time with HR/MIN buttons.

3. No operation in 10s will conﬁrm the keep-warm time and exit keep-warm time settings.

2.2 Keep-warm levels

· The default keep-warm level is Medium.

· Tap CARAFE TEMP button repeatedly to select keep-warm level among Low/Medium/High.

· Tap CARAFE TEMP button to display current keep-warm level when level light is off.

TEMPERATURE

RANGE FOR

KEEP-WARM LEVELS

Low temperature: ≥75°C

Medium temperature: ≥78°C

High temperature: ≥81°C

3.CLEAN Function

After using for certain times, the CLEAN light will start blinking indicating the appliance needs

cleaning. After the CLEAN function is performed completely, the CLEAN light stops blinking.

When this light illuminates or you want to perform cleaning, take the following steps:

1. Fill the tank with cold water to the Max water level line. Tap CLEAN button and

BREW/AUTO OFF button to enter CLEAN mode.

2. The appliance will work for 1 min and stop for 2 min repeatedly, until one beep is heard.

3. Under CLEAN mode, tap CLEAN or BREW/AUTO OFF to exit the mode, CLEAN light goes off.

4. Restore to Factory Settings

In standby status, press and hold HR and MIN button simultaneously, 3 beeps will be heard, the

coffee maker restores to factory settings.

Coffee Sharing ！

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TaoTronics TT-CM001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9.18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TaoTronics TT-CM001 Manual

Product: