803890
7
Zoom out
Zoom in
Previous page
1/13
Next page
Low Water Protection: Auto Shut-off the Humidifier
The unit will turn off automatically when water has been depleted. The low water indicator “Err” on
the LED display will light up.
10
09
Tap the Power Button to start (default: medium mist level) / stop misting with a beep sound with each
Power On / Off
1. When turned off, although the unit stops working, the fan will continue working for 3 minutes
to avoid generation of mildew in the mist tube.
2. When turned off, the LED display will dim to half of the brightness if there is no operation in 3
seconds.
Tap the Mist Button to adjust the mist output between high / medium / low levels, the mist level
indicator on the LED display will light up accordingly.
Mist Adjustment
Tap the Warm Mist Button to adjust the heat level between high / medium / low levels. When the
heat level is at high level, tap the Warm Mist Button one more time to turn off the heating. The
corresponding warm mist level indicator on the LED Display will light up.
Warm Mist Adjustment
1. Tap the Sleep Button to enter sleep mode. The LED display will show “ZZZ”.
2. The beep sound is disabled in sleep mode and the LED display will turn off if there is no operation
in 3 seconds. Tap any button (except the Power Button) to wake it up.
3. The unit will enter low mist level automatically, while the mist, humidity, and timer settings remain
functional. The warm mist mode is disabled.
4. Tap the Sleep Button again to turn off the sleep mode with “ZZZ” showing on the LED display.
Sleep Mode
1. Tap the Humidity Button to set the humidity level from 30% to 95% with an increase of 5% with
each tap.
2. Once set, the humidity level on the LED display will flash 3 times to confirm your setting.
3. When the humidity level is at 95%, tap the Humidity Button one more time to cancel the humidity
setting, the LED display will show “-- --%“.
4. Or you can turn off the humidity setting at any time by tapping and holding the Humidity Button
for 2 seconds.
Humidity Setting
The most comfortable environmental humidity is between 40%-60%. Please adjust the mist as
needed.
1. Tap the Timer Button to set the timer from 1 hour to 12 hours with an increase of 1 hour with each
tap. Once set, the timer indicator on the LED display will flash 3 times to confirm the setting.
2. When the timer is at 12 hours, tap the Timer Button again to turn off the timer. Or you can turn off
the timer at any time by tapping and holding the Timer Button for 2 seconds.
Timer Setting
Memory Function
If power is not disconnected, the unit will remember the mist level setting of the last time when it was
turned off.
High Temperature Alarm
High temperature alarm will be activated if temperature of the heat tube is too high, 8 beep sounds
will be heard every other second. The unit will stop working after 1 minute.
Caution: Unplug the power source and wait for 3 minutes to allow the unit to cool down before you
turn it on again.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TaoTronics TT-AH018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TaoTronics TT-AH018 in the language / languages: English as an attachment in your email.

The manual is 2.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info