415747
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
9
Technical Specifications
30 - 180 Watts per channel
110 Watts RMS
275 Watts peak
113.5 dB (110 Watts RMS / 1m)
117.5 dB (275 Watts peak / 1m)
93dB (2.83 Volts @ 1m)
8 Ohm
34Hz - 25kHz
90 degree conical
Less than 1.5% at 110 Watts RMS (50Hz - 20kHz)
254mm (10”) Dual Concentric™ utilising paper pulp cone
with twin roll impregnated fabric surround
52mm (2”) edge-wound voice coil
33mm (1
1
/3”) edge-wound voice coil
Bi-wired, hard-wired passive, low loss,
2nd order compensated LF. 1st order HF
1.3kHz
+
/- 3dB over 1.3kHz to 25kHz shelving
Distributed port
100 litres (3.5 cu. ft.)
950mm (37
3
/8”) x 456mm (17
15
/16”) x 366mm (14
3
/8”) (H x W x D)
30 kilograms (66 lbs)
Walnut veneered 18mm (
3
/4”) particle board
Solid walnut edging
1040mm (41”) x 540mm (21
1
/4”) x 420mm (16
1
/2”) (H x W x D)
36 kilograms (79.4 lbs)
RECOMMENDED AMPLIFIER POWER
POWER RATING
MAXIMUM SPL
SENSITIVITY
NOMINAL IMPEDANCE
FREQUENCY RESPONSE
DISPERSION
TOTAL HARMONIC DISTORTION
DRIVE UNIT
DRIVER TYPE
LOW FREQUENCY
HIGH FREQUENCY
CROSSOVER
CROSSOVER TYPE
CROSSOVER FREQUENCY
ADJUSTMENTS
CABINET
ENCLOSURE TYPE
VOLUME
DIMENSIONS
WEIGHT
CONSTRUCTION
PACKAGE DETAIL
DIMENSIONS
WEIGHT
PERFORMANCE
Care of the Cabinet
The cabinet is constructed from carefully selected solid walnut and walnut veneers that have been hand waxed before dispatch from
our finishing workshop.
To maintain the natural wood appearance it is important that only a wax of similar formulation is used.
A jar of specially formulated wax is included with each loudspeaker. This wax should be applied very sparingly with a soft lint-free cloth
(muslin for example) taking great care to avoid putting wax on the grille material. Work the wax into the wood covering a small area
at a time.
In common with all solid wood furniture, exposure to extremes of heat, cold and varying humidity will cause the wood to ease slightly.
Therefore it is recommended that the loudspeaker is protected from environmental extremes to guard against any such occurrence.
Faultfinding
Tannoy loudspeakers are designed and manufactured to be reliable. When a fault occurs in a hi-fi system the effect is always heard
through the loudspeakers although they may not be the source of the fault. It is important to trace the cause of the problem as accurately
as possible.
A fault heard on one source (only CD or tape for instance) is most unlikely to be a loudspeaker problem. Loudspeakers do not generate
hum, hiss or rumble although high-quality, wide-bandwidth loudspeakers may emphasise such problems.
Tannoy Quality
An important part of Tannoy's design philosophy is to produce loudspeakers with a level of performance beyond the most exacting
specifications of contemporary source equipment.
Loudspeaker design is no longer a 'black art'. It is now possible to use computers to model designs and predict results. Comprehensive
test equipment is used to pin-point problems with cabinets or drive units; anechoic chambers help in producing accurate measurements.
Computer aided design (CAD) and sophisticated test equipment are used extensively at Tannoy but we always remember that listening
tests must be the final judge.
Strict quality control is more easily achieved because all the loudspeakers are built in-house at the Tannoy factory in Scotland. All
drive units are designed and manufactured by Tannoy. All incoming parts are thoroughly tested to ensure that they are as specified.
Not only is all data computerised but CAD ensures every loudspeaker meets or exceeds our exacting standards.
Warranty and Service
Tannoy Prestige loudspeakers will operate for many years without trouble provided they are cared for as instructed.
Tannoy Prestige loudspeakers are warranted against manufacturing defects in material or craftsmanship over a period of 5 years from
the date of purchase. This warranty is in addition to your statutory rights as a customer. Tannoy cannot however be held responsible
for failures caused by abuse, unauthorised modifications, improper operations or damage caused by faults elsewhere in your system.
The determination of the cause of failure will be made by Tannoy Ltd or its authorised Distributor or Service Agent based on physical
inspection of the failed parts.
If you suspect a problem with your loudspeakers then in the first instance discuss it with your Tannoy Dealer. The Dealer has the
expertise and experience to help you troubleshoot the system and assess the situation.
If you continue to have problems contact your Tannoy Distributor or Tannoy Customer Services at our Coatbridge address.
Due to our policy of continuous improvement, all specifications are subject to change without notice.
Caution
The high peak power handling of Tannoy loudspeakers will allow responsible use with larger amplifiers on wide dynamic range material.
Take care with any amplifier, irrespective of power output, to avoid abnormal conditions such as switch-on surges or output overload
(clipping) that may result in peaks of power greatly over the rated output.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tannoy turnberry he at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tannoy turnberry he in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info