545132

Tanita UM-028F Manual

8
Zoom out
Zoom in
Previous page
1/32
Next page
6
Eng
GETTING ACCURATE READINGS
To ensure accuracy, readings should be taken without clothing and under consistent
conditions of hydration. If you do not undress, always remove your socks or stockings,
and be sure the soles of your feet are clean before stepping on the measuring platform.
Be sure that your heels are correctly aligned with the electrodes on the measuring
platform. Don’t worry if your feet appear too large for the unit ¬accurate readings can
still be obtained if your toes overhang the platform. It is best to take readings at the
same time of day. Try to wait about three hours after rising, eating, or hard exercise
before taking measurements. While readings taken under other conditions may not
have the same absolute values, they are accurate for determining the percentage of
change as long as the readings are taken in a consistent manner. To monitor progress,
compare weight and body fat percentage taken under the same conditions over a period
of time.
Toes may overhang
measuring platform
Heels centered
on electrodes
Note: An accurate reading will not be
possible if the soles of your feet are not
clean, or if your knees are bent or you are in
a sitting position.
TAKING WEIGHT AND BODY FAT READINGS
After programming your personal data you are ready to take a reading.
1. Tap the ON/OFF Key
The unit will beep and the display will show “0.0”. Now step onto the platform.
Note: If you step onto the platform before “0.0” appears the display will show
“Error” and you will not obtain a reading. Furthermore, if you do not step onto
the measuring platform within about 30 seconds after “0.0” appears, the power is
shut-off automatically.
2. Get Your Readings
Your weight will be shown first. Continue to stand on the platform.
“00000” will appear on the display and disappear one by one from left to right.
The readings will be shown alternately 5 times as follows:
Personal data Weight Body fat percentage
Note: Do not step off until “00000” disappears.
Note: Even if you step off the platform after all the result are displayed, the alternating display of Body Weight and Body Fat
Percentage will be repeated 5 times. The unit will then shut down automatically.
MEMORY
SET
When a wrong personal number appears, push MEMORY Button until your
personal number appears during measurement.
Note:
• When your data is not stored, push MEMORY Button until “F-1” appears. The
unit will then shut off. Please repeat the steps from "Setting and Storing Data in
Memory". (p.5)
• When “F-2” is displayed after measurement, no personal data is stored in the
unit. Please store your personal data before measuring.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita UM-028F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita UM-028F in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info