545152
6
Zoom out
Zoom in
Previous page
1/15
Next page
Page 6/13
.2
Details of command
1. Sending form of command
Command character string + (CR+LF) is accepted by one-unit.
(CR+LF) is used as a terminator. In the explanation after this, (CR+LF) is omitted.
2. Incorrect command
Everything is processed as an incorrect command excluding command explained in the following
section.
When the equipment receives incorrect command, “!” is replied to the host.
When the parameter of the command cannot be correctly received, the same response is done.
3. Error status
The error message might be sent to the host as a response to a correct command, or without any
command.
In the following table is the list of the error message and the meaning of it.
E0 Internal trouble in equipment
E1 Overload of scale
E2 Impedance measurement error
E3 Zero point setting error of scale
E4 Measurement command received without setting personal information
E5 Zero point of the scales are not set
E6 The parameter of the set data is imperfect
E7 Fat % measurement error
E8 Setting item memory error
E9 Negative overload of scale
4. Attention
1. Do not transmit a new command from the host while measuring weight and impedance.
(To avoid the miss-operation Including M1)
2. Do not transmit the command from the host while being transmitting data from the equipment.
(To avoid the miss-operation Including M1)
3. In the command transmission from the host, it is necessary to leave space 100ms or more.
4. In the command transmission from the host, do not separate 250ms or more between the
characters.
5. The response when an incorrect command is received is “!”.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita MC-980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita MC-980 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info