545137
7
Zoom out
Zoom in
Previous page
1/12
Next page
5
SETTING AND STORING PERSONAL DATA IN MEMORY
The unit can be operated only if data has been programmed into one of the personal data memories.
1. Turn on the Power
Press the Set button to turn on the unit.
The unit will beep to confirm activation, the Personal data number will be displayed, and the display will flash.
Note: If you don’t operate the unit for 60 seconds after the unit has been turned on, the unit will turn off automatically.
Note: If you make a mistake or want to turn the unit off before you have finished programming it, press the OFF button to force
quit.
2. Select a Personal data Number
Press the </> buttons to select a Personal data number (1, 2, 3, 4 and 5). Once you reach the Personal
data number you wish to use, press the SET button. The unit will beep once to confirm.
3. Set your Birthday
Set the date of your birthday (Year / Month / Day) using
</> buttons. Press the SET button to confirm at each
programming. The unit will beep once to confirm.
Note: The range of age is from 5 – 17.
4. Select Female or Male
UsetheUp/DownbuttonstoscrollthroughFemale( ), Male ( ) settings, then press the Set button.
The unit will beep once to confirm.
5. Specify the Height
The display defaults to 3’ 0.0” (90cm) (range of height is from 3’ 0.0” – 7’ 3.0” or 90cm – 220cm).
Usethe</>buttonstospecifyHeightandthenpresstheSETbutton.Theunitwillbeeponcetoconfirm.
The display shows the personal data one time to confirm, and then the display shows “0.0” and is ready
for measurement.
6. Measuring your weight and body fat
Step on to the scale after “0.0” is shown on display within 30 seconds.
Do not step off until Body fat % in shown.
The readings will be shown for 40 seconds.
The unit will then shut off and the readings will be stored in the memory.
Note: If you step onto the scale before “0.0” appears the display will show “Error” and you will not obtain a reading. Furthermore,
if you do not step onto the measuring scale within about 30 seconds after “0.0” appears, the power is shut-off
automatically. Please try the setting and storing personal data process again.
Note: If you change the birthday and/or gender, the unit will show “CLr”.
If you select “YES” using </> buttons, the existing personal data will be
deleted.
If you select “no” using </> buttons, no new data will be saved (existing data
will be unchanged) then the unit will shut off.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BF-689 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BF-689 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info