545046
6
Zoom out
Zoom in
Previous page
1/30
Next page
DGB
9
EINLEITUNG
Wir danken Ihnen, dass Sie sich für den Kauf einer Tanita
Körperfettanalyse-Waage entschieden haben. Das Gerät arbeitet unter
Einsatz der Bioelektrischen Impedanzanalyse (BIA), einem dem neuesten
Stand der Technik entsprechenden Verfahren zur Messung von Körperfett.
Sicherheitsmaßnahmen
Personen mit implantierten medizinischen Geräten wie z.B.
einem Herzschrittmacher, wird empfohlen, die
Körperfettmessungs-Funktion dieser Tanita
Körperfettanalyse-Waage nicht zu benutzen. Dieses Gerät
sendet ein schwaches elektrisches Signal durch den Körper,
das die Funktionsfähigkeit eines Herzschrittmachers
beeinträchtigen kann.
Diese Tanita Körperfettanalyse-Waage ist ausschließlich für private
Nutzung bestimmt. Sie sollte nicht für gewerbliche oder professionelle
Zwecke in Krankenhäusern oder anderen medizinischen Einrichtungen
verwendet werden, da sie nicht den für häufigen Einsatz unter
professionellen Bedingungen nötigen Normen entspricht.
Verwenden Sie dieses Gerät nicht auf rutschigen Oberflächen oder
nassem Fußboden.
Wichtige Hinweise für den Benutzer
Diese Körperfettanalyse-Waage ist für den Gebrauch von Erwachsenen und
Kindern (7-17 Jahre) bestimmt, die wenig bis mäßig aktiv sind sowie for
athletische Körpertypen.(Sportler-Modus: Nur bei BF-680W)
Als „athletisch“ bezeichnet Tanita Personen, die etwa 10 Stunden pro
Woche intensiv trainieren und einen Ruhepuls von höchstens 60
Schlägen/Minute haben. Darüber hinaus bezieht „athletisch“ Personen
ein, die weniger als 10 Stunden pro Woche Sport treiben, im Laufe
ihres Lebens jedoch sportlich immer sehr aktiv gewesen sind.
Die Körperfettanalyse-Funktion sollte von schwangeren Frauen
nicht angewendet, von Profisportlern oder Bodybuildern nur zur
Trendanalyse herangezogen werden.
Durch Fehlgebrauch des Geräts oder Stromstöße kann es zum Verlust der
aufgezeichneten Daten kommen. Tanita übernimmt keine Haftung für
Schäden, die durch den Verlust von aufgezeichneten Daten entstehen.
Darüber hinaus haftet Tanita weder für Schäden und Verluste, die durch
diese Geräte entstehen, noch für Forderungen Dritter.
Anmerkung: Lesen Sie sich diese
Bedienungsanleitung bitte sorgfältig durch und
bewahren Sie sie zum späteren Nachschlagen auf.
Anmerkung: Die Ermittlung des Körperfetts
variiert mit der im Körper vorhandenen
Wassermenge und kann durch folgende Faktoren
beeinflußt werden: Dehydrierung oder
Überhydrierung wegen Alkoholgenuß,
Menstruation, intensives körperliches Training
usw.
TROUBLESHOOTING
If the following problems occur …then…
A wrong weight format appears followed by kg, lb, or st-lb
Refer to “Switching the Weight Mode” on p.5.
“Lo” appears on the display, or all the data appears and immediately
disappears.
Batteries are low. When this message appears, be sure to replace the batteries immediately, since weak batteries will
affect the accuracy of your measurements. Change all the batteries at the same time with new AA-size batteries.
Note: Your settings will not be erased from the memory when you remove the batteries.
“Err” appears while measuring.
Please stand on the platform keeping movement to a minimum.
The unit cannot accurately measure your weight if it detects movement.
The Body Fat Percentage reading does not appear or ”-----“ appears after
the weight is measured.
Your personal data has not been programmed. Follow the steps on p.6.
Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with the guides
on the measuring platform.
“OL” appears while measuring.
Reading cannot be obtained if the weight capacity is exceeded.
“Err FAT%” appears while measuring.
The Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.
TAKING WEIGHT MEASUREMENT ONLY
Select Weight-Only Key
Using your toe, tap the Weight-only key. After 2 or 3 seconds, “0.0” will
appear in the display and the unit will beep. When “0.0” appears in the
display, step onto the platform. The body weight value will appear.
If you
remain on the platform, the display will flash for about 30 seconds, and then the power
will automatically turn off. If you step off the platform, the weight will continue to show for
about 5 seconds, then “0.0” will appear and the unit will shut off automatically.
2
1
PROGRAMMING THE GUEST MODE
The Guest mode allows you to use the monitor without losing the
information already assigned to a Personal Key.
To programme the Guest mode, use the Down button marked to turn on the
power. Then follow steps 3 through 5 in “Setting and Storing Data” (p.6.)
The unit will beep twice and the display will show “0.0”. Step onto the
platform. Next follow the directions for “Get Your Reading” (p.7).
Note : If you step onto the platform before “0.0” appears the display will show “Err” and
you will not obtain a reading.
8
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BF-679W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BF-679W in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info