545136
6
Zoom out
Zoom in
Previous page
1/16
Next page
4
5) Once the pairing process is completed with the platform, the remote
display shows "donE" and then the clock will be displayed. If the remote
display shows “ P-Err ”, please try the pairing process again.
Note : To confirm the paired serial number on each personal number after completion the pairing process:
Press and hold the SET button for 2 seconds on the remote display. The remote display will show "-1-". Select the per
-
sonal number using s/t buttons, and press the SET button to confirm. The display shows the paired serial number for
3 seconds. "-----" is shown if there is no serial number stored for selected personal number.
3.Setting and storing personal data in the remote display
You will receive readings only if data has been programmed into the Tanita remote display.
1) Select Personal Data Number
Use the SET button to activate the unit. Use s/t buttons to select a personal data number. Press SET button.
2) Set Age (Applicable Age: 5 - 17)
Use s/t buttons to select age. Press SET button.
3) Select Female or Male
Use s/t buttons to select Female ( )/ Male( ). Press SET button.
4) Specify Height
Use s/t buttons to select height. Press SET button to confirm.
The remote display will beep twice and the display will flash all data three times to confirm the programming.
The display will turn to the clock.
4.Taking body composition readings
1) Before proceeding, make sure that the platform and remote display are within 17 feet (5 m) of each other.
2) Press
t (User) button to turn the unit on and then press s/t buttons to select personal data number.
(Do not stand on the platform.)
3) Press the SET button to confirm your personal number.
4) When the remote display and platform are paired, the platform will
beep once, and the Green Indicator Light on the platform will blink.
5) Step onto the platform while the Green Indicator Light is blinking.
6) After the measurement is complete, the platform will beep twice,
readings will automatically show on the remote display (Refer to fig. 1).
7) Carefully step off platform after measurement is complete.
8) At anytime during and after the Auto Display Process”, the user may
use
s/t buttons to scroll through the different results. For advanced
scrolling, the user may press and hold s/t button.
Upon reading the desired readings, release the button to view the
result, readings will appear for 30 seconds before the unit automatically
shuts off.
Weight
Body Fat %
Body Water %
Muscle Mass
Physic Rating
BMR or DCI
Metabolic Age
Bone Mass
Visceral Fat Rating
n/a
n/a
n/a
n/a
n/a
n/a
n/a
BF-2000 Displayed Readings
fig.1
Warning Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical
device. The body fat monitor function is not intended for pregnant women, professional athlete or bodybuilders.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BF-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BF-2000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info