659110
21
Zoom out
Zoom in
Previous page
1/24
Next page
en
21
If the following problems occur ...then...
Refer to “Changing the Weighing Unit” on p.8.
Note: Your settings are not erased from the memory when you remove the batteries.
Your personal data has not been programmed. Follow the steps on p.7.
Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with
the guides on the measuring platform.
Reading cannot be obtained if the weight capacity is exceeded.
Troubleshooting
• The wrong weight format appears followed by kg, lb, or stlb.
• “Lo” appears on the display, or all the data appears and immediately disappears.
• “Err” appears while measuring.
• The Body Fat Percentage reading does not appear or “Err” appears after the weight is measured.
Batteries are low. When this message appears, be sure to replace the batteries immediately since weak
batteries affect the accuracy of your measurements. Replace all the batteries at the same time with new
AA-size batteries.
Please stand on the monitor and keep as still as possible.
The monitor cannot accurately measure your weight if it detects movement.
The monitor cannot take measurements if the Body Fat Percentage is higher than 75%.
• “OL” appears while measuring.
The personal data settings are not complete.
You need to measure body composition once immediately after entering the personal data.
• Cannot measure body composition even though personal data is set.
Set the target weight.
Press the DIET button while the weight is being displayed.
• The target weight information is not displayed even when the DIET button is pressed.
Set the diet mode for females. Also, enter the menstrual cycle start date every month.
• Diet mode for females information is not displayed even when the DIET button is pressed.
Is an electrical device that emits radio waves being used near this monitor?
Was the monitor stored standing upright or with items placed on top?
Did you move the monitor just prior to measuring?
Did you move the monitor immediately after measuring?
Measurement results and target setting values are not saved.
• "Err " appears.
The menstruation starting date has not been registered for a while.
Register the menstruation starting date.
• " " and "CYCLE" are displayed after the measurement results screen.Or the " " flashes in the measurement item screen.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BCG-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BCG-02 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info