659113
8
Zoom out
Zoom in
Previous page
1/12
Next page
6
en
Setting and Storing Personal Data in Memory
The monitor can only be operated if data has been programmed into one of the personal data memories.
1. Turn on the Power
Press the Set button to turn on the monitor.
The monitor beeps to confirm activation, the Personal data number is displayed, and the display flashes.
Note: If you don’t operate the monitor for 60 seconds after the monitor has been turned on, it turns off automatically.
Note: If you make a mistake or want to turn the monitor off before you have finished programming it, press the OFF button to
force quit.
2. Select a Personal data Number
Press the Up/Down buttons to select a Personal data number (1, 2, 3, 4 or 5). Once you reach the
Personal data number you wish to use, press the SET button. The monitor beeps once to confirm.
3. Set your Birthday
Set the date of your birthday (Year / Month / Day) using
the Up/Down buttons. Press the SET button each time to
enter each setting. The monitor beeps once to confirm.
Note: The available age range is from 5 – 99.
4. Select Female or Male
Use the Up/Down buttons to scroll through and select from the Female ( ), Male ( ), Female/Athlete
(
/ ) and Male/Athlete ( / ) settings, then press the Set button. The monitor beeps once to
confirm.
5. Specify the Height
The display defaults to 5’ 70” (170cm) (height range is from 3’ 0.0” – 7’ 3.0” or 90cm – 220cm).
Use the Up/Down buttons to specify the height and then press the SET button. The monitor beeps once
to confirm. The display shows the personal data once to confirm, and then the display shows “0.0” and is
ready for measurement.
6. Measuring your weight and body fat
Step on to the monitor within 30 seconds of “0.0” being shown on the display.
Do not step off until the Body fat % is shown.
The readings are shown for 40 seconds.
The monitor then shuts off and the readings are stored in the memory.
Note: If you step onto the monitor before “0.0” appears, “Err” appears in the display and readings cannot be obtained.
Furthermore, if you do not step onto the monitor within 30 seconds of “0.0” appearing, the power is shut-off automatically.
Please try setting and storing personal data again.
Note: If you change the birthday and/or gender, the “CLr” appears in the display.
Select “YES” using the Up/Down buttons to delete the existing personal data.
Select “no” using Up/Down buttons to keep the existing data and shut down
the monitor.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BCG-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BCG-01 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info