Manual Tanita BC-554 (page 4 of 19) (English, German, Dutch, French, Italian, Portuguese, Spanish)

545030

Zoom out

Zoom in

1/19

PROGRAMMING THE GUEST MODE

TAKING WEIGHT MEASUREMENT ONLY

Guest mode allows you to programe the unit for a one-time use

without resetting a Personal data number.

Press

▲

button to activate the unit. Then follow the steps:

Set Age, Select Female or Male, and Specify Height.

Note: If you step onto the platform before "0.0" appears the display will show "Error" and

you will not obtain a reading.

Select Weight-Only Key

Press the Weight-only key. After 2 or 3 seconds, "0.0" will appear in the

display and the unit will beep. When "0.0" appears in the display, step onto

the platform. The body weight value will appear. If you remain on the platform,

the display will flash for about 30 seconds, and then the power will automatically turn off.

If you step off the platform, the weight will continue to show for about 5 seconds, then

"0.0" will appear and the unit will shut off automatically.

TROUBLE SHOOTING

If the following problems occur ...then...

・A wrong weight format appears followed by kg, lb, or st-lb.

Refer to Switching the Weight Mode on p.3.

・“Lo” appears on the display, or all the data appears and immediately

disappears.

Batteries are low. When this message appears, be sure to replace the batteries immediately, since weak batteries will

affect the accuracy of your measurements. Change all the batteries at the same time with new AA-size batteries.

Note:Your settings will not be erased from the memory when you remove the batteries.

・“Error

” appears while measuring.

Please stand on the platform keeping movement to a minimum.

The unit cannot accurately measure your weight if it detects movement.

The Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.

・The Body Fat Percentage reading does not appear or “-----” appears after

the weight is measured.

Your personal data has not been programed. Follow the steps on p.3.

Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with the guides

on the measuring platform.

・“OL” appears while measuring.

Reading cannot be obtained if the weight capacity is exceeded.

1. Select Personal Key and Step On

Press your pre-programmed Personal key.

(Release the key within 3 seconds or the display will show "Error".)

The unit will beep and the display will show the programmed date.

The unit will beep again and the display will show "0.0".

Now step onto the platform.

Note: If you step onto the platform before "0.0" appears the display will show "Error "and you

will not obtain a reading. Furthermore, if you do not step onto the measuring platform

within about 30 seconds after "0.0" appears, the power is shut-off automatically.

TAKING BODY COMPOSITION READINGS

2.Get Your Readings: Auto Display Process

After the measurement is taken, readings will be automatically displayed in the order listed below.

An icon will light up for each result reading being displayed.

After the last result reading is displayed, the weight reading will again appear, then the unit will automatically shut off.

At anytime during and after the “Auto Display Process”, the user may use the ▲／▼ buttons to scroll thru the

different results.

For advanced scrolling, the user may press and hold ▲／▼ button.

Upon reading the desired readings, release the button to view the result, readings will appear for 30 seconds

before the unit automatically shuts off.

Note: For children (age 7-17), the unit will only display the Weight and the Body Fat % (it will not

display the Healthy Range Indicator).

3.Recall Function

To obtain previous reading press SET button while the readings are being displayed.

The following result of previous readings will be displayed by using the ▲／▼ buttons.

・Weight

・Body Fat %

・Total Body Water %

・Muscle Mass

Press SET button again to go back to the current result display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-554 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tanita BC-554 Manual

Product: