Manual Tanita BC-550T (page 4 of 19) (English, German, Dutch, French, Italian, Portuguese, Spanish)

545017

Zoom out

Zoom in

1/19

TAKING WEIGHT MEASUREMENT ONLY

Select Weight-Only Key

Press the Weight-only key. After 2 or 3 seconds, "0.0" will appear in the

display and the unit will beep. When "0.0" appears in the display, step onto

the platform. The body weight value will appear. If you remain on the platform,

the display will flash for about 30 seconds, and then the power will automatically turn off.

If you step off the platform, the weight will continue to show for about 5 seconds, then

"0.0" will appear and the unit will shut off automatically.

TROUBLESHOOTING

If the following problems occur ...then...

・A wrong weight format appears followed by kg, lb, or st-lb

Refer to Switching the Weight Mode on p.2.

・"Lo" appears on the display, or all the data appears and immediately

disappears.

Batteries are low. When this message appears, be sure to replace the batteries immediately, since weak batteries will

affect the accuracy of your measurements. Change all the batteries at the same time with new AA-size batteries.

Note:Your settings will not be erased from the memory when you remove the batteries.

・"Error" appears while measuring.

Please stand on the platform keeping movement to a minimum.

The unit cannot accurately measure your weight if it detects movement.

The Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.

・The Body Fat Percentage reading does not appear or "----- " appears after

the weight is measured.

Your personal data has not been programmed. Follow the steps on p.3.

Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with the guides

on the measuring platform.

・"OL" appears while measuring.

Reading cannot be obtained if the weight capacity is exceeded.

・No reading is obtained after pressing a feature key.

Step off scale when body fat reading appears, then press feature key.

1. Select Personal Key and Step On

Press your pre-programmed Personal key.

(Release the key within 3 seconds or the display will show "Error".)

The unit will beep and the display will show the programmed date.

The unit will beep again and the display will show "0.0".

Now step onto the platform.

Note: If you step onto the platform before "0.0" appears the display will show "Error" and

you will not obtain a reading. Furthermore, if you do not step onto the measuring platform

within about 30 seconds after "0.0" appears, the power is shut-off automatically.

2. Obtain Your Readings

Your weight will be shown first.

Continue to stand on the platform.

"00000" will appear on the display and disappear one by one from left to right.

Your Body Fat percentage(%FAT) and Body Fat Range will appear on the

display screen.

After your body fat percentage has been calculated, a black bar will flash

along the bottom of the display, identifying where you fall within the Body

Fat Ranges for your age and gender

Note: Do not step off until Body Fat % is shown.

To see other readings, Carefully step off scale, press other feature keys.

The feature keys will not function while remaining on scale.

To see other readings press each feature key while weight & Body Fat % is

displayed.

Press same feature key to display weight & Body Fat % again.

Note: The following readings are applicable only to adults aged

18 years to 99 years.

TAKING BODY COMPOSITION READINGS

・Press key to display Total Body Water % .

・Press key to display Muscle Mass.

・Press key to display DCI.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-550T in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tanita BC-550T Manual

Product: