545042
7
Zoom out
Zoom in
Previous page
1/28
Next page
5
Guest mode allows you to programe the unit for a one-time use without resetting a Personal
data number.
Press button to activate the unit. Then follow the steps: Set Age, Select Female or Male,
and Specify Height.
Note: If you step onto the platform before “0.0” appears the display will show “Error” and
you will not obtain a reading.
PROGRAMMING THE GUEST MODE
Select Weight-Only Key
Press the Weight-only key. After 2 or 3 seconds, “0.0” will appear in the display and the unit
will beep. When “0.0” appears in the display, step onto the platform. The body weight value
will appear. If you remain on the platform, the display will flash for about 30 seconds, and
then the power will automatically turn off.
If you step off the platform, the weight will continue to show for about 5 seconds, then “0.0”
will appear and the unit will shut off automatically.
TAKING WEIGHT MEASUREMENT ONLY
If the following problems occur ...then...
A wrong weight format appears followed by kg, lb, or st-lb.
Refer to Switching the Weight Mode on p.3.
“Lo” appears on the display, or all the data appears and immediately disappears.
Batteries are low. When this message appears, be sure to replace the batteries immediately, since weak batteries will affect the
accuracy of your measurements. Change all the batteries at the same time with new AA-size batteries.
Note:Your settings will not be erased from the memory when you remove the batteries.
“Error” appears while measuring.
Please stand on the platform keeping movement to a minimum.
The unit cannot accurately measure your weight if it detects movement.
The Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.
The Body Fat Percentage reading does not appear or “-----” appears after the weight is measured.
Your personal data has not been programed. Follow the steps on p.3.
Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with the guides on the
measuring platform.
“OL” appears while measuring.
Reading cannot be obtained if the weight capacity is exceeded.
TROUBLE SHOOTING
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BC-549PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-549PLUS in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info