656199
9
Zoom out
Zoom in
Previous page
1/60
Next page
7
If recognition error continues to occur (when the wrong personal data number continues to be displayed), select your own personal
data number before taking your measurement.
1. Select Personal data Number
Press the USER button to turn the unit on.
Press the Up/Down buttons to select personal data number.
Press the SET button.
The display will show “0.0”.
Now step onto the platform.
Note: If you step onto the scale before “0.0” appears the display will show “Err” and you will not obtain readings.
2. Get Your Readings
After the measurement is taken, readings will be automatically displayed in the order listed below.
After the last result reading is displayed, the weight reading will again appear, then the unit will automatically shut off.
The user may use the RESULT button to scroll through the different results.
For advanced scrolling, the user may press and hold RESULT button.
Upon reading the desired readings, release the button to view the result, readings will appear for 40 seconds before the unit
automatically shuts off.
Note: Do not step off until “oooo” disappears.
Note: For children (age 5-17), the unit will only display the Weight, the BMI and the Body Fat %.
• Weight • BMI • Body Fat %
• Visceral Fat • Muscle Mass • Physique Rating
• Bone Mass • Basal Metabolic Rating
• Metabolic Age • Total Body Water %
Guest mode allows you to program the unit for a one-time use without reading a personal data number.
Press the USER button to activate the unit. Press the Up/Down buttons to select “-0-”. Press the SET button.
Then follow the steps: Set Age, Select Female or Male, and Specify the Height.
Step onto the scale after “0.0” is shown on the display. Your weight will be shown first, continue standing on
the scale until the body fat % reading is shown on the display. The reading will be shown for 40 seconds.
Note: Do not step off until “oooo” disappears.
Note: If you step onto the scale before “0.0” appears the display will show “Err” and you will not obtain readings.
PROGRAMMING THE GUEST MODE
TAKING WEIGHT AND BODY FAT READINGS
Press the Weight-only button. Step onto the scale after “0.0” is shown on the display. The body weight value will appear.
The display will light for about 20 seconds, and then the power will automatically turn off.
TAKING WEIGHT MEASUREMENT ONLY
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BC-313 Body Composition Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-313 Body Composition Monitor in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info