472812
4
Zoom out
Zoom in
Previous page
1/21
Next page
2
Preparations before use
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the supplied AA-
batteries as indicated.
Note: Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fluid may leak and damage floors. If you do not intend
to use this unit for a long period of time, it is advisable to remove the batteries
before storage.
Please note that the included batteries from factory may have decreased energy levels
over time.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure safe
and accurate measurement.
Use carpet feet when the scale is used on soft surface, such as rugs or carpetings.
Note : To avoid possible injury, do not step on the edge of the platform.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid
soaps.
• Do not step on the platform when wet.
• Do not drop any objects onto the platform.
• Do not use this scale while operation transmitters (such as a cell phone) as this may affect your results.
• If not in use for a prolonged period of time it is recommended that you remove the batteries.
Getting accurate readings
To ensure accuracy, readings should be taken without clothing and
under consistent conditions of hydration. If you do not undress,
always remove your socks or stockings, and be sure the soles of
your feet are clean before stepping on the measuring platform. Be
sure that your heels are correctly aligned on the measuring platform.
Don’t worry if your feet appear too large for the unit -accurate
readings can still be obtained if your toes overhang the platform.
It is best to take readings at the same time of day. Try to wait about
three hours after rising, eating, or hard exercise before taking
measurements.
While readings taken under other conditions may not have the same
absolute values, they are accurate for determining the percentage of
change as long as the readings are taken in a consistent manner. To
monitor progress, compare weight and body fat percentage taken
under the same conditions over a period of time.
Note :
An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent or you are in a sitting
position.
Heels centered on
electrodes
Toes may overhang
measuring platform
Open as shown.
Direction of
the batteries.
Detachable Carpet Feet (only for
piles up to 0.28” ( 7 mm) thick)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BC-1000 InnerScan at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-1000 InnerScan in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tanita BC-1000 InnerScan

Tanita BC-1000 InnerScan Additional guide - English - 44 pages

Tanita BC-1000 InnerScan User Manual - English - 37 pages

Tanita BC-1000 InnerScan Additional guide - German - 44 pages

Tanita BC-1000 InnerScan User Manual - German - 37 pages

Tanita BC-1000 InnerScan Additional guide - Dutch - 44 pages

Tanita BC-1000 InnerScan User Manual - Dutch - 37 pages

Tanita BC-1000 InnerScan Additional guide - French - 44 pages

Tanita BC-1000 InnerScan User Manual - French - 37 pages

Tanita BC-1000 InnerScan Additional guide - Italian - 44 pages

Tanita BC-1000 InnerScan User Manual - Italian - 37 pages

Tanita BC-1000 InnerScan Additional guide - Spanish - 44 pages

Tanita BC-1000 InnerScan User Manual - Spanish - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info