488742
5
Zoom out
Zoom in
Previous page
1/13
Next page
GB-4
- Install the unit where it will not get in the driver's way and cannot injure the passenger if there is a sudden or emergency stop.
- Do not install the unit where it would be subject to high temperatures, direct sunlight or near a heat source. Also avoid contact with
dust, dirt and excessive vibrations.
Installation Opening
This unit can be installed in any dashboard that has an opening with the following dimensions (DIN
standard):
Installing the unit
1. Make sure the ignition is turned off, and then disconnect the vehicle’s battery.
2. Remove the surround by carefully pulling it up to detach it.
3. Use the two release keys supplied to remove the unit from the mounting bracket. Insert the left and right release keys so that they
release the left and right sides of the bracket.
Then take the unit out of the bracket.
4. Mount the bracket by inserting it into the dashboard opening and bend out the tabs
located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so
choose the ones that best match the size of the opening. To secure the bracket, bend out
the appropriate tabs so that they hold it in place in the dashboard.
5. Connect the wire harness and the antenna (see “Wiring diagram” in next section),
being careful not to pinch any wires or cables.
6. Use the equipment supplied (Hex Nut (M5mm) and Spring Washer fixed on the back of
the unit) to attach to a solid metal part of the vehicle beneath the dashboard.
7. Fit the detachable front panel to the car radio in order to check the connections. Briefly
connect the battery to do this. Once you have checked the connections, slide the unit into
its bracket until you hear a click. Next fit the surround.
8. Reconnect the cable to the vehicle battery's negative (-) terminal. Then replace the
surround and install the unit's front panel (see the section 'ATTACHING THE FRONT
PANEL').
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tamashi XT 18 DL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tamashi XT 18 DL in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info