40 41
1.6 Inserting/Removing a memory card
The device contains a card slot for a memory card. Memory cards can be inserted according
to the procedure below:
(1) On the left side of the machine, there is a card slot.
(2) Insert the memory card face-down into the slot.
The display shows the memory card symbol “ ” on the top bar.
Card symbol
To remove the card, press it first and then pull it out.
Note: Make sure the device is powered off before you insert or remove a memory card. Never
insert or remove a card when the device is working, as the card or the device may be damaged.
1.7 Switching on/off
To switch on the device, press and hold the Power Switch until the power indicator lights up.
To switch off the device, press and hold the Power Switch until the screen is off.
1.8 Converting Videos/Images
Before you download a video or image from a PC to the device, please convert into a supported
file type by using the included Transcording Tool on the CineWalker file conversion software CD.
The device supports MP3/WMA audio, ASF video and JPG image files.
The following tables show which file types can be converted:
1.4 Installing the battery
The device comes with a rechargeable lithium-ion battery. Please install the battery as
shown below:
(1) Press the point embossed with an arrow sign, and slide the battery cover as shown below
to remove it.
(2) Place the battery into the battery compartment, making sure it is correctly aligned.
(3) Close the battery cover.
1.5 Using the DC adapter
1.5.1 To charge the battery
After installing the battery, you need to charge it using the DC adapter. Charging the
battery fully takes about 3.5 hours. To charge the battery, follow these steps:
(1) Connect one end of the adapter to the power jack.
(2) Connect the other end to the electrical outlet.
Note:
a. The charge indicator turns red during charging. When the battery is fully charged,
the charge indicator switches off.
b. You can still operate the machine while the battery is being charged.
1.5.2 To power the device
The DC adapter can be used not only to charge the battery but also to supply power to
the device. To conserve the battery’s charge, you can remove the battery and just use
the DC adapter to power the device.
When the DC adapter is connected, the power indication “ ” appears at the upper
right of the screen.
Chapter 1 Getting Started Chapter 1 Getting Started
Englisch
