540611

Tacx Vortex T1960 computer Manual

5
Zoom out
Zoom in
Previous page
1/19
Next page
8 9
EN
DE
FR
NL
ANT Heart rate belt
When you select ANT, the search for an ANT heart rate belt will start, the magnifying glass is blinking.
When a belt has been found the actual value will appear where the three bars next to the heart
symbol are.
Use Arrow right to confirm the setting and go to choose sound.
Sound
Sound On is blinking. Change from On to Off using Arrow up or Arrow down. When sound is on, the
symbol will appear at the bottom of the display. Use Arrow right to go to the next step.
Connecting the brake
The data on the last brake connected will appear on the display. Using Arrow up, you can start the
search for a Vortex brake, in case of warranty for instance. The magnifying glass is blinking. When
a brake has been found the serial number, the firmware version number and voltage will appear.
Arrow right saves the connected brake to memory and continues to next step.
Brake calibration
Calibrationvalue0appearsintoprightpartofscreen.Rideataspeedhigherthan30km/hor19
mi/h until the word Stop appears to start up calibration. When you stop the Vortex computer will
measure the deceleration of the rear wheel and the new calibration value will appear on the display.
Arrow right saves the calibration value to memory and continues to next step.
When calibration has failed, for instance because you started cycling during the measurement, the display will
show CAL FAIL. Use Arrow up to start calibration again.
Settings before the start
The accuracy of the Vortex’ power display depends on de pressure of the roll on the tyre, tyre
pressure, variable magnet forces and mains tension variations, amongst other things. In order to
guarantee correct measurement of power you need to calibrate the brake. For optimum calibration
we recommend you ride for 3 minutes at least, to ensure the brake is properly warmed up.
Scale factor
The value for scale factor is blinking. When you start cycling you activate the function to adjust the
scale factor. Next to speed, the power corresponding to the scale factor in question will appear. If you
possess an external power meter you can compare these values. Using Arrow up or Arrow down you
canadjusttheVortex’scalefactorbetween80thru120untilthedisplayedpowerhasbeenlevelled.
Arrow right saves the scale factor and continues to next step.
Body weight
Body weight – without the bike - is blinking. Using Arrow up or Arrow down you can set weight
between40thru120kg.Bypressing OK you confirm the settings and go to the training display.
Settings before the start
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tacx Vortex T1960 computer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tacx Vortex T1960 computer in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info