Manual Synq CDX-2 (page 4 of 46) (English, German, Dutch, French, Portuguese, Spanish)

468129

Zoom out

Zoom in

1/46

ENGLISH USER MANUAL

SYNQ® 3/87 CDX-2

 In order to prevent electric shock, do not open the top cover. If a problem occurs, contact

your dealer.

 Do not place metal objects or spill liquid inside the CD player. Electric shock or

malfunction may result.

 This CD player uses the semiconductor laser. To allow you to enjoy music at a stable

operation, it is recommended to use this in a room of 5°C – 35°C.

 The compact disc player should not be adjusted or repaired by anyone except properly

qualified service personnel.

 This unit may cause interference to radio and television reception.

CLEANING THE CD-PLAYER:

Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside

the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit.

CONNECTIONS

 Connect the mini-DIN cable between the control unit and the main unit (CD loader).

 Use the supplied cinch cables to connect the audio outputs of the CD player with the CD

inputs of your mixing unit.

 Also connect the 2 fader start cables if your audio mixer has fader start connections.

(Synq® or Pioneer® compatible)

 Connect the mains cable.

CONTROLS AND FUNCTIONS

MAIN UNIT - FRONT:

1 233

1. Power (Power ON/OFF switch): When the power switch is pressed, the power turns

on and the blue led is lit.

2. Disc tray: Use the OPEN/CLOSE buttons to open disc tray and put the CD in place.

3. OPEN/CLOSE button: press this button to open and close the disc tray. These

buttons are disabled during playback. If the tray is not closed after 60sec. It will close

automatically to prevent damage.

ENGLISH USER MANUAL

SYNQ® 4/87 CDX-2

MAIN UNIT - REAR:

456 67 5

4. Control connector: use the supplied mini-DIN cable to connect this output to the

control unit.

5. Audio outputs: Output for the audio signals from each player. Use the supplied

cinch/cinch cables to connect these outputs to the CD/line inputs of your mixing unit.

6. Digital out socket: Use this connector to connect the digital signal (S/PDIF format) to

the input of a digital amplifier or digital recorder (ex. Mini disc)

7. Mains input: connect the CD player to the 230V AC mains, using the supplied power-

cord.

CONTROL UNIT - FRONT:

2 4 6 8 9 1053 71

12 14 15 16 17

19 20 21 22

2423

11 13

1. SEARCH WHEEL (OUTER RING): This wheel has 4 forward and 4 backward speed

positions for searching through songs. The more you turn the wheel in either direction

the faster you will search through the music.

2. JOG WHEEL (INNER RING): This jog wheel serves 3 functions depending on the

mode you are working in.

 The jog wheel acts as a slow frame search (1/75sec) control when the CD is not

playing but either paused or set to a cue point. To set a new cue point, spin the

wheel then press PLAY or LOOP IN when you have determined the proper position.

Press CUE to return to the “CUE POINT”.

 If the track is playing, the jog wheel temporarily bends the pitch of the music up to

+/-10% by rotating the wheel clockwise to speed it up or counterclockwise to slow it

down. The amount of pitch change is determined by the speed of rotation.

 When the loop cut/extend function is selected, every tick in counterclockwise

direction cuts the loop in half. Every tick in clockwise direction doubles the loop

length.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Synq CDX-2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Synq CDX-2 Manual

Product: