517172

Sym VS 125 Manual

18
Zoom out
Zoom in
Previous page
1/29
Next page
【Oil Filter Cleaning】
Open the filter nut assembly of the element, and
remove the element. Remove the foreign materials
from the element by using a gasoline or air spraying
gun.
WARNING:
y Oil level will not be correct when checking the oil level with the motorcycle parked on an unleveled
ground or immediately after the engine stopped.
y Engine and exhaust pipe are hot right after engine stopped. Pay special attention not to get burned
when checking or replacing engine oil.
INSPECTION OF FUEL LEVEL
y Firmly support the scooter with its main stand on a leveled ground, turn the main switch to “ON” position,
check if the fuel meter needle moves.
y Fuel gauge may be defective or electric circuit disconnected if there is some fuel in the tank, but the
needle does not move. Please ride slowly to an authorized service station to have your scooter
checked.
CAUTION:
y Do not check the fuel level or refuel while the engine is running. It is not necessary to start engine to
check the fuel level.
y Make sure fuel cap on tank is closed tightly before riding scooter.
y Do not run engine in an enclosed space. Ensure proper ventilation as exhaust fumes may be
dangerous and over exposure to same may result in illness, injury or death.
y There is a danger of fire and explosion when handling fuel. Never refuel in an enclosed space.
y Do not over fill the fuel tank.
y
Do not spill fuel onto hot engine or related parts.
TRANSMISSION OIL INSPECTION AND CHANGE
INSPECTION:
y Use the main stand to support the scooter on a level ground, after the engine stops, wait for 3~5 minutes
or until all engine parts have cooled. Remove the transmission oil infusion bolt, put a measuring glass
under the drain bolt, and remove the drain bolt. Let the oil flows into measuring glass and check for
decreased or not. (at disassembly: 110 c.c. / at change: 90~100 c.c.).
OIL REPLACEMENT:
y Stop the engine and use the main stand to support your scooter on a level ground. Remove the infusion
bolt and drain bolt, drain out the oil.
y Install the drain bolt and tighten it. Fill new transmission oil (90~100 cc.), and install the infusion bolt and
tighten it. (make sure that bolts are tightened and check that there’s no leakage.)
※ Recommend Oil: Genuine SYM HYPOID GEAR OIL (SAE 85W-140).
y Use SAE85-90 when outside temperature is below 0℃.
10. Inspection and maintenance before riding
15
… 18 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sym-vs-125

Reset search

  • I need the pipe Work of the sym vs 125 carburater to see the way it goes Submitted on 23-11-2022 at 16:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym VS 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym VS 125 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info