517153
8
Zoom out
Zoom in
Previous page
1/24
Next page
8
7. USE OF EACH COMPONENT
y Light Switches
When the switch is turned to this position as the engine is being started, headlight, rear light,
instrument panel light, and position light will come on. This is the high beam of headlight
switching switch.
When the switch is turned to this position as the engine is being started, rear light, instrument
panel light, and position light will come on.
y When the switch is turned to this position, all lights will go off.
y Electrical starter button
This is a starting motor button (switch) for engine starting.
With the main switch on, press this button while holding the front or rear brake lever will start
the engine.
CAUTION:
y Release this button immediately after engine has been starter, and never press the button again
to avoid damaging the engine.
y This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
y Do not use light system. Turn headlight and turn signal light to the “off” position when the engine
is being started.
y High/low beam switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and beams.
This is for high beam.
This is for low beam.(please turn to low beam riding in city.)
y Seat open switch
Turn ignition switch to theON position and press this button down. Then, the seat will be
open.
This button will return to original position after
releasing.
Press the seat down and it will be locked
automatically.
After the seat catch has been locked , check to
make sure it has locked properly by lightly lifting
the seat.
S
eat open
switch
CAUTION:
y Be sure to remove the key after the seat
has been locked.
y Do not put the key inside the storage box
after unlocking to avoid the key being
locked inside the storage box when the
seat is pressed down automatically.
8


Need help? Post your question in this forum.

Forumrules
1

Forum

sym-symply-50

Reset search

  • can anyone show me how to put together the side stand? I bought one from a breaker Submitted on 21-5-2020 at 13:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym SYMPLY 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym SYMPLY 50 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info