660393
7
Zoom out
Zoom in
Previous page
1/26
Next page
7
In setting display mode, long press the
"MODE" button for more than 2 seconds, it
can leave the setting mode.
Fault indicator light
If there is something wrong with the ECS, the
warning light will flash.
Low fuel load warning light
When there is a little fuel inside the tank,
the warning light will be on.
Clock setting
1. Press "MOD" button for 2±0.5 seconds at
the “clock” mode. Then enter into time
setting mode status, it can adjust “hour”.
2. Short press "MOD" button for 0.5±0.25
seconds, hour” —> tens digit of “minute”
—> single digits of “minute”—> Quit.
Clock(flashing)-Hour-->
Clock-Minute(10min)-(flashing)->
Clock-Minute(1min)-(flashing)->Quit
3.In setting “Clock” mode, short press “SET”
button then figure add one.
4.In setting mode, do not press button or press
"MOD" button for 0.5±0.25 at setting single
digits of “minute”, then quit.
Switching display mode:
1.Press “MOD” button for 0.5±0.25 seconds at
the TOTAL display status, switch to TRIP
display.
2.Press “MOD” button for 0.5±0.25 seconds at
the TRIP display status,switch to "ODO"
display.
3.Press “SET” button for 0.5±0.25 seconds at
the CLOCK display status,switch to "voltage"
display.
4.Press “SET” button for 0.5±0.25 seconds at
the voltage display status,switch to "CLOCK"
display.
Reset engine Oil replacement indicator
light:
It is used to indicate the oil exchange time,
with lights, when the vehicle was driven about
1000 kilometers, indicator light will light up,
warn the users to replace the oil.
After finish oil change, put the main switch in
ON”, when the indicator light is on,long press
“SET” button for more than 2±0.5 seconds at
the ODO display status.
Reset Short mileage display(TRIP):
Pressing “SET” button for 2±0.5 seconds at
the TRIP display status, trip meter may reset
to zero (0.0) and re-calculation.
Switching speedometer pointer display
and LCD display:
Long pressing “MOD” button for more than
0.5 seconds at the voltage display
status,switching speedometer pointer display
to LCD display.
Switching RPM pointer display and
LCD display:
Long pressing “MOD” button for more than
0.5 seconds at the voltage display
status,switching RPM pointer display to LCD
display.
Switching kilometers/miles display:
Long press "SET" and "MOD" button for more
than 2±0.5 seconds, switch different display
between kilometers and miles.
§OPERATION OF IGNITION SWITCH §
ON” position:
Engine can be started in this position.
Ignition switch key can not be removed.
OFF” position:
Engine is shut off and can not be started in this
position .
Ignition switch key can be removed.
§OPERATION OF STEERING HANDLE LOCK SWITCH §
“Steering handle lock” position
Turn the steering handle to left and insert the key
into, press ignition switch key clockwise and then
lightly turn it to left to the lock” position.
The steering handle is locked in this position.
Ignition switch key can be removed.
When unlocking, simply turn the key from the
LOCK position to the OFF position.
§OPERATION OF SEAT OPEN SWITCH§
Inserted the ignition switch key in the main switch lock.
Turn the ignition switch key to theseat open position counter-clockwise.
Then, the seat will be open.
I
G
N
I
T
I
O
N
S
W
I
T
C
H
IGNITION SWITCH
CAUTION:
Make sure to take the
key away with you
before you lock your
seat.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

sym-symphony-st

Reset search

  • where is the main fuse on a 2021 sym symphony ? can't see one at the battery Submitted on 20-10-2022 at 17:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym SYMPHONY ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym SYMPHONY ST in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info