673291
18
Zoom out
Zoom in
Previous page
1/28
Next page
17
8. Inspection and maintenance before riding
FRONT DISK BRAKE INSPECTION
(Leak, damaged, looseness of brake line)
Visual check brake lines for leakage, or damage,
check brake lines connections for looseness using a
wrench or similar tool, and check whether steering
handle vibration in riding, or any parts' interference
may have damage the brake lines. If so, bring your
scooter to your SANYANG dealer for repairing or
service.
CAUTION
Please ride your scooter on a dry road surface slowly
and operate front and rear brakes in order to find out
if there is any malfunction so as to ensure the scooter
is at its optimum condition and safe to ride.
Checking front brake lining
Check the brake from behind the brake caliper. The
brake pad must be replaced with new lining when the
brake pad wear limit reaches the brake disk.
Checking oil quantity in brake oil reservoir
Park the scooter on a level ground, and check if fluid
level is under the “LOWER” mark.
Recommended
Brake Fluid BRAKE OIL (DOT 3 or DOT4).
Replenishment of front wheel brake fluid
1. Loosen the screws and remove the master cylinder
cover.
2. Wipe clean foreign materials , dirt around the
reservoir, being careful not to let foreign materials
fall into the reservoir.
3. Remove the diaphragm plate and the diaphragm.
4. Add brake fluid to upper level.
5. Install the diaphragm plate and the diaphragm, and
install the master cylinder cover.
6. Please note the diaphragm direction, and do not let
foreign materials fall into the reservoir.
And tighten the master cylinder cover securely.
CAUTION
To prevent chemical reaction, please do not use
brake fluids other than those recommended.
Do not fill above the upper limit when adding
brake fluid and avoid dropping on painting or
plastic components to prevent damage.
Brake fluid
Hose connection
Brake pad wear limit grooves
Brake caliper
Brake disk
Fluid screen
Lower limit
max
min
Brake fluid
reservoir cap
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym Mio 115 - FS11W1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym Mio 115 - FS11W1 in the language / languages: English as an attachment in your email.

The manual is 9,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info