517184

Sym JOYRIDE 150 Manual

12
Zoom out
Zoom in
Previous page
1/29
Next page
• Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights
will flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
SAFETY HELMET HOOK
• Hook the safety helmet chin belt onto the hook.
CAUTION:
• Do not hang the safety helmet onto this hook when riding to avoid damaging scooter and loosing
safety helmet’s function.
SADDLE LOCK
• Unlock:
Insert the ignition switch key and turn to left to unlock.
• Unlock:
Press this button down when ignition switch is in the “ON” position, the seat can be unlock.
• Lock:
Press the saddle down and it will be locked automatically.
After the saddle has been locked, check to make sure it has been locked properly by lightly lifting
the saddle.
CAUTION:
• Do not put the key inside the storage box after unlocking to avoid the key being locked inside the
storage box when the saddle is pressed down automatically.
•
Be sure to remove the key after the saddle has been locked.
STORAGE BOX
• This box is located under the saddle.
• Maximum load capacity: 10kg.
• Do not store valuables in the box.
• Make sure that the saddle has been locked completely after it was pressed down.
• Take out valuables before washing to avoid wetting these objects.
•
Do not place thermal sensitive objects in the box because of engine’s heat and high temperature.
CAUTION:
Make sure to take the key a
way with you before you lock your seat.
ENGING CONTROL SWITCH
• This switch is located in the luggage box, under the seat.
• To set on the ENG. control switch, switch it to〝ON〞or〝
〞.
• Switch to〝OFF〞or〝
〞，before start the engine.
• Be sure the seat locked preperly after set on the switch.
7.Use of Each Component
10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym JOYRIDE 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym JOYRIDE 150 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info