577252
15
Zoom out
Zoom in
Previous page
1/32
Next page
15
7. Use of each component
High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights
will flash.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
Horn Switch
Press this button down when ignition switch is in the “ON” position, the horn will sound.
CAUTION:
Do not press this button when you are in the no horn area.
SADDLE LOCK
Unlock:
Insert your ignition switch key into the lock on the lower left of the saddle, and turn the key to the right.
Then, the saddle can be lifted up.
Lock:
Press the saddle down and push it locks automatically.
CAUTION:
Please do not put the key into the storage compartment after saddle is unlocked to prevent the key
from being locked inside and can not be removed when the saddle is locked.
Be sure to remove the key after the saddle has been locked
SAFETY HELMET HOOK
Open the saddle, and hook the safety helmet chin belt onto the hook, and then lock the saddle.
CAUTION:
Please do not hang your safety helmet as usual on the hook when driving, to prevent it from
damaging the vehicle and affecting your driving safety.
Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency.
Switch to this position and the engine can be started.
Passing Switch
Turn ignition switch “ON” and press this button down. Then, the high beam of headlight will come on
immediately to warn the driver of the vehicle ahead that you intend to overtake him/her. (For overtaking, high
beam indicator will come on at this time) This button will return to original position after releasing
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym JET EVO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym JET EVO in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info