517155
19
Zoom out
Zoom in
Previous page
1/26
Next page
19
1. Loosen the screws and remove the master cylinder cover.
2. Wipe clean foreign materials, dirt around the reservoir, being
careful not to let foreign materials fall into the reservoir.
3. Remove the diaphragm plate and the diaphragm.
4. Add brake fluid to upper level.
5. Install the diaphragm plate and the diaphragm, and install the
master cylinder cover.
6. Please note the diaphragm direction, and do not let foreign
materials fall into the reservoir. And tighten the master
cylinder cover securely.
§THROTTLE VALVE HANDLE CLEARANCE ADJUSTMENT §
z Correct clearance allows throttle vale handle to rotate 2~6mm.
z To adjust, first loosen the fixing nut, then turn the adjusting nut to
the proper position and securely tighten the fixing nut.
Check Items:
1. Check throttle valve cable to see if it can be moved smoothly
from a closed position to a wide open position.
2. Rotate steering handle from side to side to check if the throttle
valve cable is interfered.
3. Check to see if the throttle valve cable is obstructed by other
cables preventing it from being operated smoothly.
§INSPECTION AND MAINTENANCE OF BATTERY §
z This motorcycle is equipped with a maintenance-free type battery, so it is unnecessary to check and add electrolyte.
Have your motorcycle checked by SYM Authorized Dealer or Franchised Dealer should any abnormality is found.
CAUTION:
z Clean the battery posts with warm water if the posts are eroded and have some white powders on them.
z If there is an obvious erosion on the terminals, disconnect the cables, then clean the erosion off with a steel
brush or a piece of sandpaper.
z Install battery cable after cleaning and apply a thin coat of grease on the terminals.
z Install battery in reverse order of removal.
CAUTION:
Do not fill above the upper limit when
adding brake fluid and avoid dropping on
p
ainting or plastic components to preven
t
damage.
Negative
Positive
Remove the battery terminals and clean if there are dirt and
corrosion on them.
Battery removal procedures are as follows:
Turn ignition switch “OFF,” and remove negative cable
screw firstly and disconnect the negative cable. Then,
remove positive cable screw and positive cable.
Adjust nut
Lock nut
2~6 mm
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym JET EUROX 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym JET EUROX 100 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info