6979
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
10. INSPECTION AND MAINTENANCE BEFORE RIDING
CHECKING AND CHANGING FUSES
Fuse box is on the frame body, remove the luggage box then you can see the fuse box is on the frame body
right side. Turn off ignition switch, and check fuses if they are intact. Replace the blown fuse with a new
one having the same specified amperage rating (20A or 15A or 10A). Using a fuse which the amperes is
larger than specification, a brass or iron wire to replace a blown fuse is strictly prohibited to avoid damaging
the electrical system and the circuit.
Remove the storage box, and you’ll find the fuse box near light.
Open the fuse box cover, and pull out the fuse. Check it for damage or broken.
Fuses must be firmly secured with wire connectors when replacing. Loose connections will result in
overhead and damage.
Use only parts having the specified specification to replace electrical components such as light bulbs.
Using parts not having the specified specifications for replacement may cause the fuse to blow and
over-discharge the battery.
Avoid spraying water directly on or around fuse box when washing the scooter.
Take your scooter to your dealer for an inspection if a fuse is blown by unknown causes.
CHECKING THE TURN SIGNAL LIGHTS AND HORN
Turn the ignition switch key to “ON” position.
Turn on the turn signal light switch, and make sure that the front & rear and left & right signal lights flashes
and also check if the warning buzzer sounds.
Check turn signal light covers if they are dirty, crack, or loosen.
Press horn button to check if it works.
CHECKING THE HEADLIGHT AND TAIL LIGHT
Start engine and turn on the headlight switch. Check if headlight and tail light come on.
Check the brightness and direction of headlight by wall to see if it is correct.
Check the headlight cover if it is dirty, crack, or loosen.
Burned fuse
Fuse box
CAUTION:
y Use only specified bulbs for turn signal lights. Otherwise, the normal operation of turn signal lights
will be affected.
y Switch on the turn signal before changing lanes or marking a turn to inform others of your intent.
y After changing lanes or making a turn, switch of turn signal immediately by pressing the reset
button. This button is located in the center of the turn signal switch.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym HD Orbit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym HD Orbit in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info