6979
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
7. USE OF EACH COMPONENT
USE OF BUTTONS
y Light Switches
When the switch is turned to this position as the engine
is being started, headlight, rear light, instrument panel
light, and position light will come on.
When the switch is turned to this position as the
engine is being started, rear light, instrument panel
light, and position light will come on.
When the switch is turned to this position, all lights
will go off.
Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON", press this button while holding the front or rear brake lever will
start the engine.
High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
Passing Switch
Turn ignition switch “ON” and press this button down. Then, the high beam of headlight
will come on immediately to warn the driver of the vehicle ahead that you intend to
overtake him/her. (For overtaking, high beam indicator will come on at this time) This
button will return to original position after releasing.
PASSING
Light Switches
Electrical Starter
Button
High/Low Beam Switch
Turn Signal Switch
Horn Switch
Passing switch
Note:
y Position Light Function:
This light can indicate the
motorcycle’s position when the
motorcycle is running in dim,
rainy, or foggy weather.
CAUTION:
Release this button immediately after engine has been started, and never press the button
again to avoid damaging the engine.
This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
Do not use light system. Turn headlight and turn signal lights to the “OFF” position when the
engine is being started.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym HD Orbit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym HD Orbit in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info