517187
13
Zoom out
Zoom in
Previous page
1/31
Next page
High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
Passing Switch
Turn ignition switch “ON” and press this button down. Then, the high beam of headlight will
come on immediately to warn the driver of the vehicle ahead that you intend to overtake
him/her. (For overtaking, high beam indicator will come on at this time) This button will return
to original position after releasing.
Horn Switch
NOTICE:
y Do not press the horn button when
you are in the no horn area.
Press this button down when ignition switch is in
the “ON” position to sound, the horn.
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights will
flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
SAFETY HELMET HOOK
y Open the seat, and hook the safety helmet chin belt onto the hook, and then lock the seat.
WARNING:
y Never hang your safety helmet on the helmet hook while riding. Doing so could interfere with your
riding safety and could damage the scooter.
SEAT LOCK
Unlock:
Insert the ignition switch key to the seat lock and turn to left to unlock.
Lock:
Press the seat down and it will be locked automatically.
A
fter the seat has been locked, check to make sure it has been locked properly by lightly lifting the seat.
CAUTION:
y Do not put the scooter key in the luggage box compartment after seat has been unlocked. This will
prevent the key from being locked inside the luggage compartment if the seat should be unintentionally
closed.
y
Be sure to remove the key after the seat has been locked.
11
7. Use of Each Component
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym HD EVO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym HD EVO in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info