660399
20
Zoom out
Zoom in
Previous page
1/27
Next page
20
§CHECKING FOR FUEL LEAKAGE§
Check fuel tank, fuel cup, fuel hose, carburetor for leakage.
§CHECKING THE LUBRICATION OF BODYS VARIOUS MECHANISMS§
Check the bodys pivot points if they have enough lubrication.
(for example, the pivot points on the main stand, the side stand, and the brake leveretc.).
§CHECKING THE SPARK PLUG§
Remove the cap of spark plug cable (remove the spark plug using
the spark plug wrench in the tool kit.
Check the electrode if it is dirty or fouled by carbon deposits.
Remove the carbon deposits on the electrode with steel wire, and
clean the spark plug with gasoline, then, wipe dry with a rag.
Check the electrode, and adjust its gap to 0.6~0.7 mm. (Check it
with a feeler gauge)
Hand tight the spark plug as far as it can go and then tighten it
another 1/2~3/4 turns with a wrench.
§CHECKING THE AIR CLEANER §
DISASSEMBLE PRCEDURE
1. Remove left frame body cover firstly.
2.Remove tapping screws from air cleaner cover.
3.Remove the air cleaner cover, remove the element
screws , then remove filter element.
4.Take the element out and clean it. (Refer to
maintenance schedule.)
DISASSEMBLE PRCEDURE
Assemble the air cleaner in reverse order of disassemble.
CAUTION:
Dust deposit is one of the major causes of reducing output horsepower and increasing fuel
consumption.
Change the air cleaner element more frequently to prolong the engine’s service life if the
motorcycle is driven on dusty roads very often.
If air cleaner is installed improperly, dust will be absorbed into cylinders, which may cause a
premature wear and reducing output power and engine life.
Be careful not to soak the air cleaner when washing the motorcycle. Otherwise, it will cause
engine hard to start.
WARNING:
The engine is very hot after running. Pay attention not to get burned.
Use only spark plugs suitable for the engine specifications of this motorcycle recommended by
the manufacturer. (Refer to specifications.)
Element
Screws
0.6~0.7 mm
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym FIDDLE III 200i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym FIDDLE III 200i in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info