11993
74
Zoom out
Zoom in
Previous page
1/88
Next page
OTHERS
T
ROUBLESHOOTING
74
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple corrections may solve the problem and restore the proper operation.
Symptom Remedy
Power
The power does not turn on. • Check that the AC power cord is connected securely.
Picture
There is no picture.
• Re-connect the connecting cord securely.
• The connecting cords are damaged.
• The Setup Display appears. Press SETUP or RETURN
button to turn off the display.
Check antenna/cable wire and the fittings at each end of the wire.
Picture noise appears.
• The disc is dirty or flawed.
• Head cleaning for VCR may be necessary. Refer to "AUTO
HEAD CLEANING".
Adjust tracking control for better picture by pressing
CHANNEL
K
/
L
buttons while you are playing a video tape.
Check antenna/cable wire and the fittings at each end of the wire.
TV program pictures are distorted.
• Adjust antenna.
• Adjust the picture.
Place this unit and any bunched antenna cables farther apart.
Check antenna/cable wire and the fittings at each end of the wire.
TV program reception does not fill the
screen.
Tr y to set the channels with "Auto Preset" in SETUP menu (page 16).
• Select a channel of any TV program using the CHANNEL
K
/
L
buttons.
Check antenna/cable wire and the fittings at each end of the wire.
Sound
No sound is output. • Adjust volume control.
• The disc is dirty or flawed.
• Re-connect all connections securely.
• The connecting cord is damaged.
• Check the connections to the amplifier input.
• The input source setting on the amplifier is incorrect.
• The unit is in Pause mode or in Slow-motion play mode.
• The unit is in fast forward or fast reverse mode.
If the audio signal does not come through the AUDIO OUT
COAXIAL jack, check the Audio Setup settings (pages 12-13).
TV channels cannot be changed.
• Connect the antenna cable correctly (page 10).
•Perform auto channel preset on page 16.
Check antenna/cable wire and the fittings at each end of the wire.
Distorted color appears on screen
• Magnetism from nearby appliances and unshielded
speakers and geomagnetism might affect the color of the
TV picture. Move the TV/VCR/DVD away from the
appliances or unshielded speakers, the TV/VCR/DVD can
repair itself automatically. If you want to repair
immediately, unplug the power cord, then plug it in again
after 30 minutes later or so.
Sound is noisy.
• The disc is dirty or flawed.
When playing a DTS-CD, noise may come from the speakers.
This unit is not compatible with DTS-CD.
No DTS sound is output.
• This unit is not compatible with DTS sound.
T2021UB_45-88.QX33 04.9.16 4:29 PM Page 74
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sylvania 6727FRE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sylvania 6727FRE in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info