11973
15
Zoom out
Zoom in
Previous page
1/44
Next page
EN
V
IDEO CASSETTE
This unit will operate with any cassette that has the
mark. For best results, we recommend the
use of high-quality tapes. Do not use poor quality or
damaged tapes.
SELECTING TAPE SPEEDS
Before recording, select the tape speed from : SP
mode
(Standard Play) or SLP mode (Super Long
Play). You can also play a tape recorded in
LP mode
(Long Play).
ERASE PREVENTION
Break off the tab on the
back edge of the cassette
to prevent accidental eras-
ing of recording.
Cover the hole with plastic
tape to record on the tape
again.
NOTES:
In the TV/VCR mode, if the cassette without tab is insert-
ed, playback will start automatically.
If you press [REC/OTR] or [REC] when a cassette with-
out tab is inserted, the unit will eject it automatically.
Tab
Plastic Tape
P
LAYBACK
ON SCREEN DISPLAY / VIDEO CASSETTE / PLAYBACK
TV/VCR SECTION
Tape Speed Recording/Playback time
T120 T160T60Type of tape
2 hours 2-2/3 hours1 hourSP mode
6 hours 8 hours3 hoursSLP mode
TRACKING ADJUSTMENT
•Tracking adjustment will be set automatically when
you start playback (Digital tracking function).
If noise lines (black and white streaks) appear on
the playback picture, use
[CH.
KK
/
LL
] until the
streaks disappear (Manual tracking adjustment).
This is available in Pause/Still/Slow mode, too.
•To release manual tracking mode, stop the tape
once and start playback again.
STILL PICTURE
During playback, press [PAUSE F] to freeze the
picture.
You can advance the picture frame by frame by
pressing
[PAUSE F] repeatedly.
•To release the Still mode, press
[PLAY
BB
].
SLOW MOTION
During playback, press [PAUSE F] then press
[FWDD].
•To release the Slow mode, press
[PLAY
BB
].
NOTE:
If the unit keeps the slow mode or still mode for more
than 5 minutes, it will automatically enter the stop mode.
PLAY
B
STOP
REW
E
FF
D
15
BASIC PLAYBACK
TV/VCRTV/VCR
EJECT
A
1 Insert a pre-recorded tape so that the
unit turns on automatically (Auto
Power On).
2 Select TV/VCR mode by pressing [SELECT].
NOTE:
If the erase-prevention tab has been removed, the
unit will change the VCR mode and starts playback
automatically.
3 To start playback,
press
[PLAY
BB
].
NOTE:
•Even in the DVD mode, you can start the VCR play-
back if you press [PLAY
BB
] on the front panel (of
the TV/VCR side).
4 To stop the playback,
press
[STOP
CC
].
5 To rewind the tape,
press
[REVE].
To forward the tape,
press
[FWDD].
To stop winding, press
[STOP
CC
].
6 To eject the tape from the unit,
press
[STOP/EJECT C A]
on the front panel.
T2200UA_EN.QX4 06.2.13 3:44 PM Page 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sylvania 6724DG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sylvania 6724DG in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info