11969
41
Zoom out
Zoom in
Previous page
1/44
Next page
Owner’s Manual
6720FDG
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING
AFTER READING OWNER’S MANUAL,
PLEASE CALL
TOLL FREE 1-800-968-3429 OR VISIT OUR WEB SITE AT
http://www.SylvaniaConsumerElectronics.com
20 inch DVD TRIPLE COMBO
INSTRUCCIONES EN ESPAÑOL INCLUDAS
FEATURES
• Auto Channel Programming
• Timer Recording
1 year 8 events programmable
Daily/Weekly recording
• One Touch Recording
• Auto Clock Setting
• Screen Saver
• Auto Power On and Off
• Parental Lock
• Resume Play (DVD)
• Closed Caption Decoder
• Virtual Surround
PLEASE READ BEFORE USING THIS EQUIPMENT
P Owner's Manual
(1EMN21452)
P Remote Control
(NF101UD)
P AA batteries x 2
Owner's Manual
SUPPLIED ACCESSORIES
This unit comes with the following accessories. Please confirm that
all the accessories are included.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 1
EN
2
P
RECAUTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS
PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING
THE APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The caution marking is located on the rear of the cabinet.
I
MPORTANT SAFEGUARDS
1. Read instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5.
Cleaning - Unplug the unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted ser-
vice and, that for some specific reason, such as the possibili-
ty of the loss of an authorization code for a CATV converter,
is not intended to be unplugged by the user for cleaning or
any other purpose, may exclude the reference to unplugging
the appliance in the cleaning description otherwise required
in item 5.
6. Attachments - Do not use attachments not recommended
by the unit manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this unit near water - for
example, near a bath tub, wash bowl, kitchen sink, or laun-
dry tub, in a wet basement, or near a swimming pool, and
the like.
8. Accessories - Do not place this unit on an
unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury to
someone, and serious damage to the appli-
ance. Use only with a cart, stand, tripod, brack-
et, or table recommended by the manufacturer,
or sold with the unit. Any mounting of the appli-
ance should follow the manufacturer’s instructions and
should use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should be
moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
Ameubles - Cet appareil ne doit être placé
que sur un meuble (avec ou sans roulettes)
recommandé par le fabricant. Si vous l’installez
sur un meuble à roulettes, déplacez les deux
ensembles avec précaution. Un arrêt brusque,
l’utilisation d’une force excessive et des sur-
faces irrégulières risquent de déstabiliser l’ensemble et de le
renverser.
9. Ventilation - Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating, and
these openings must not be blocked or covered. The open-
ings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat register. This unit
should not be placed in a built-in installation such as a book-
case or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10. Power Sources - This unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, con-
sult your appliance dealer or local power company. For the
units intended to operate from battery power, or other
sources, refer to the operating instructions.
11. Grounding or Polarization - This unit is equipped with a
polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your elec-
trician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
12. Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
13. Outdoor Antenna grounding - If an outside antenna or
cable system is connected to the unit, be sure the antenna
or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA No.
70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conduc-
tors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. (Fig. A)
PORTABLE CART WARNING
S3126A
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
S2898A
SYMBOLE D'AVERTISSEMENT POUR
LES COMPOSANTES
APPAREIL ET MEUBLE A ROULETTES
S3126A
T1200UA_EN.QX3 06.2.6 11:15 AM Page 2
EN
3
PRECAUTIONS
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-
tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC WARNING-
This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or
modification is made.
14. Lightning - For added protection for this unit receiver during
a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other elec-
tric light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this unit through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the unit.
18. Servicing - Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified ser-
vice personnel.
19. Damage Requiring Service - Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operat-
ing instructions. Adjust only those controls that are covered
by the operating instructions, as improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the unit to
its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance, this
indicates a need for service.
20. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other haz-
ards.
21. Safety Check - Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safety
checks to determine that the unit is in proper operating con-
dition.
22. Heat - This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 3
4
EN
The serial number of this product may be found on the back of the unit. No other unit has the same serial
number as yours. You should record the number and other vital information here and retain this book as a
permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
NOTE ABOUT RECYCLING
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-
tions concerning chemical wastes.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU'AU FOND.
LOCATION
For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place
for its installation:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the
top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Avoid moving unit to locations where temperature differences are extreme.
• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the unit disc loading tray.
• Do not place anything directly on top of the unit.
MOISTURE WARNING
• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or
after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist
unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the
unit on and leave it at least 2 hours to dry out.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-
lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system
of the building as close to the point of cable entry as practical.
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service
this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 4
T
ABLE OF CONTENTS
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . .5
SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5
PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6
ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
. .6
CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)
.7
INSTALLING THE BATTERIES IN REMOTE CONTROL
.7
OPERATING CONTROLS AND FUNCTIONS . . .8
TV/VCR SECTION
TV OPERATION AND SETTINGS . . . . . . . . . . . .9
WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9
SLEEP TIMER / PICTURE CONTROL . . . . . . . . . . .9
CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .10
DAYLIGHT-SAVING TIME . . . . . . . . . . . . . . . . . . .11
ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11
CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .11
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .13
ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . .14
STATUS DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . .14
CHECKING THE STATUS . . . . . . . . . . . . . . . . . . .14
MTS (Multi-channel Television Sound) SYSTEM . .14
VIDEO CASSETTE . . . . . . . . . . . . . . . . . . . . . .15
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . .16
RENTAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .16
AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . .16
SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . .16
ZERO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .16
PICTURE SEARCH . . . . . . . . . . . . . . . . . . . . . . . .17
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . .17
INDEX SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . .17
RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . .18
NORMAL RECORDING . . . . . . . . . . . . . . . . . . . . .18
OTR (One Touch Recording) . . . . . . . . . . . . . . . . .18
AUTOMATIC TIMER RECORDING . . . . . . . . . . . .19
AUTO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .21
AUTO REWIND-EJECT . . . . . . . . . . . . . . . . . . . . .21
COPYING A VIDEO CASSETTE (from another source)
.21
DVD SECTION
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .22
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .22
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .22
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .23
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .23
DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .23
SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .
24
FUNCTION TABLE . . . . . . . . . . . . . . . . . . . . . . . .24
AUDIO MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . .25
ANGLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
BLACK LEVEL MENU . . . . . . . . . . . . . . . . . . . . . .26
V. S.S (Virtual Surround System) . . . . . . . . . . . . . .26
SEARCH MENU . . . . . . . . . . . . . . . . . . . . . . . . . .26
REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .27
PROGRAMMED PLAYBACK . . . . . . . . . . . . . . . . .28
RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . .28
ON-SCREEN INFORMATION . . . . . . . . . . . . . .28
CHANGING THE DVD SET UP ITEMS . . . . . . .29
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .29
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .32
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .34
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .35
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .35
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .36
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .37
WARRANTY . . . . . . . . . . . . . . . . . .BACK COVER
5
EN
IMPORTANT SAFEGUARDS / TABLE OF CONTENTS
TV/VCRTV/VCR
QUICK
SYMBOLS USED IN THIS MANUAL
The following symbols below appear in some headings and notes in this manual, with the following meanings.
Description refers to TV/VCR
operation (in the TV/VCR mode).
Description refers to playback of
DVD video discs (in the DVD mode).
Description refers to playback of
audio CDs (in the DVD mode).
Description refers to the items
to be set by the QUICK mode
(in the DVD mode).
T1200UA_EN.QX3 06.2.6 11:15 AM Page 5
EN
6
P
REPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
ANT.
AUDIO OUT
COAXIAL
ANT.
Cable
TV signal
Antenna
or
IN
OUT
Rear of the unit
*NOTE
(DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled
signals and require a special converter to
receive these channels. Consult your local
cable company.
OR
Incoming cable from home
Antenna / Cable Company
(No Cable Box)
Incoming cable from Cable Company
or Satellite Antenna
Cable Box or Satellite Box*
NOTE:
Before plugging the antenna into
the ANT. jack of the unit, check
that the pin is not bent. If it is bent,
straighten the pin as illustrated,
then plug the pin into the ANT. jack
of the unit.
Bent pin
Cable
Plug
(Needs to be
straightened)
(Straight pin)
For your safety and to
avoid damages to the unit,
unplug the antenna cable
from the ANT. jack before
moving the unit.
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO
jacks of this unit.
Then use [SELECT] or [CH.
KK
/
LL
] until "AUX" appears on the screen.
HEADPHONE
VIDEO
L
AUDIO
R
HEADPHONE
VIDEO L - AUDIO - R
STOP/
EJECT
F.FWDREWREC/OTRCHANNEL
TV/VCR
SELECT
DVD
OPEN/
CLOSE
STOPSKIPSKIPVOLUME
POWER
PLAY
PLAY
E SEARCH D
ex.
VCR or video
camera
, etc.
Front of the unit
Audio Cable (commercially available)
To the Audio output jacks
To the Video output jack
Video Cable (commercially available)
NOTE:
When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR
(another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.
AUX
(OUT)
(IN)
(OUT)
(IN)
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
Plug the incoming cable into the ANT. jack on the rear of the unit.
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with
this unit as shown below.
T1200UA_EN.QX3 06.2.6 11:15 AM Page 6
PLAY
B
STOP
REW
E
FF
D
15
EN
V
IDEO CASSETTE
This unit will operate with any cassette that has the
mark. For best results, we recommend the
use of high-quality tapes. Do not use poor quality or
damaged tapes.
SELECTING TAPE SPEEDS
Before recording, select the tape speed from : SP
mode
(Standard Play) or SLP mode (Super Long
Play). You can also play a tape recorded in
LP mode
(Long Play).
ERASE PREVENTION
Break off the tab on the
back edge of the cassette
to prevent accidental eras-
ing of recording.
Cover the hole with plastic
tape to record on the tape
again.
NOTES:
In the TV/VCR mode, if the cassette without tab is insert-
ed, playback will start automatically.
If you press [REC/OTR] or [REC] when a cassette with-
out tab is inserted, the unit will eject it automatically.
Tab
Plastic Tape
P
LAYBACK
BASIC PLAYBACK
TV/VCRTV/VCR
ON SCREEN DISPLAY / VIDEO CASSETTE / PLAYBACK
TV/VCR SECTION
Tape Speed Recording/Playback time
T120 T160T60Type of tape
2 hours 2-2/3 hours1 hourSP mode
6 hours 8 hours3 hoursSLP mode
EJECT
A
TRACKING ADJUSTMENT
•Tracking adjustment will be set automatically when
you start playback (Digital tracking function).
If noise lines (black and white streaks) appear on
the playback picture, use
[CH.
KK
/
LL
] until the
streaks disappear (Manual tracking adjustment).
This is available in Pause/Still/Slow mode, too.
•To release manual tracking mode, stop the tape
once and start playback again.
STILL PICTURE
During playback, press [PAUSE F] to freeze the
picture.
You can advance the picture frame by frame by
pressing
[PAUSE F] repeatedly.
•To release the Still mode, press
[PLAY
BB
].
SLOW MOTION
During playback, press [PAUSE F] then press
[FWDD].
•To release the Slow mode, press
[PLAY
BB
].
NOTE:
If the unit keeps the slow mode or still mode for more
than 5 minutes, it will automatically enter the stop mode.
1 Insert a pre-recorded tape so that the
unit turns on automatically (Auto
Power On).
2 Select TV/VCR mode by pressing [SELECT].
NOTE:
If the erase-prevention tab has been removed, the
unit will change the VCR mode and starts playbak
automatically.
3 To start playback,
press
[PLAY
BB
].
NOTE:
•Even in the DVD mode, you can start the VCR play-
back if you press [PLAY
BB
] on the front panel (of
the TV/VCR side).
4 To stop the playback,
press
[STOP
CC
].
5 To rewind the tape,
press
[REVE].
To forward the tape,
press
[FWDD].
To stop winding, press
[STOP
CC
].
6 To eject the tape from the unit,
press
[STOP/EJECT C A]
on the front panel.
T1200UA_EN.QX3 06.2.6 11:16 AM Page 15
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON 7:30
P
M
8:50
P
M
SP
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
20
EN
RECORDING
TV/VCR SECTION
TO CORRECT A PROGRAM AFTERWARD
1 Press [POWER] to turn on the unit.
2 Repeat steps 1 to 2 of "AUTOMATIC TIMER
RECORDING" on page 19.
3 Press [
BB
] (or press [
ss
] to go back one step)
until the part you want to correct begins flashing,
then use
[
KK
/
LL
] to make the changes.
Press
[ENTER] to confirm.
4 Press [POWER] to set automatic timer recording.
TO CANCEL A PROGRAM
1 Press [POWER] to turn on the unit.
2 If recording is in progress, press
[STOP/EJECT C A] on the unit.
3 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
4 Use [
KK
/
LL
] to select a program you want to
cancel and press
[CLEAR].
5 Press [SET-UP] to exit the menu.
TIMER PROGRAM EXTENSION
You can shift the time schedule of an automatic timer
recording after programming or during recording.
1 Press [POWER] to turn on the unit.
2 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
3 Press [REC] and use
[
KK
/
LL
] to select the desired
program.
4 Press [REC] repeatedly until your desired
begin/end time appears.
Each press will shift forward the begin/end time
for recording by 10 minutes.
NOTES:
When the recording is already in progress, each press
will shift forward the end time only.
If you want to cancel while setting, press
[PAUSE
FF
]
on the remote control. The recording time returns to
the original time.
When you shift forward the time schedule during
recording, the recording speed will be automatically
set to the SLP mode.
5 Press [ENTER] to complete the setting. Then
press
[SET-UP] to exit the menu.
ABOUT OVERLAP OF PROGRAMS
When programs overlap, a program may not be
recorded.
The program with an earlier start has priority.
Once the earliest program finishes, the overlapping pro-
grams will begin recording in sequence.
When the starting time is the same, the program set on
the highest position in the program list has priority.
The illustration below demonstrates the sequence of
recordings.
9:00AM 10:00AM 12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
11:00AM
Recording Sequence
*Recording period is SHADED
T1200UA_EN.QX3 06.2.6 11:16 AM Page 20
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
USER’S SET UP
RENTAL [OFF]
REPEAT PLAY [OFF]
B AUTO RETURN [ON]
21
EN
AUTO RETURN
TV/VCRTV/VCR
This function allows you to automatically
search the beginning of the recorded
program(s) after timer recording finishes.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"USER’S SET UP",
then press
[ENTER].
2 Use [
KK
/
LL
] to point to
"AUTO RETURN", then press
[ENTER] to select "ON".
3 When all the timer recordings are completed, the
unit will rewind to the beginning of the recorded
program(s) and then turn itself off.
NOTE:
If you turn off the unit while rewinding the tape, the
AUTO RETURN will stop.
TO CANCEL THE AUTO RETURN MODE
Repeat steps 1 to 2 and press [ENTER] to select
"OFF".
• Even if any power failure occurs, the unit will
retain its memory for this feature.
RECORDING
TV/VCR SECTION
AUX
SP
COPYING A VIDEO CASSETTE
(from another source)
You can make copies of video tapes for
your enjoyment.
You CANNOT copy a DVD to a videotape.
Connect the unit and a source (for playing) device
as shown the following diagram.
WARNING: Unauthorized recordings of copyrighted
video tapes may be an infringement of copyright
laws.
1 Insert a pre-recorded video cassette into the
source device (VCR, camcorder, etc.).
2 Insert a video cassette to record into this unit’s
cassette compartment.
3 Press [SPEED] to select the
desired recording speed
(SP/SLP).
4 Press [SELECT] until "AUX"
appears on the screen.
5 Press [REC/OTR] on the unit.
6 Begin playback of the tape
in the source device.
NOTE:
•For best results during copying, use the front panel con-
trols whenever possible. The remote control might affect
the operation of the source device.
7 To stop copying, press [STOP/EJECT C A] on
the unit, then stop the playback on the source
device.
VIDEO
IN
OUT
AUDIO
IN
OUT
L
R
[Ex: Jacks of
source device]
Audio/Video
cables
(not supplied)
[This unit]
TV/VCRTV/VCR
AUTO REWIND-EJECT
TV/VCRTV/VCR
When the end of a tape is reached
during recording, playback, or fast-
forward, the tape will automatically rewind to the
beginning. After rewinding finishes, the unit will
eject the tape and turn itself off.
This function is operative when REPEAT PLAY is
set to "OFF".
The tape will not auto-rewind during timer record-
ing or One Touch Recording (OTR).
T1200UA_EN.QX3 06.2.6 11:16 AM Page 21
EN
A
BOUT THE DISCS
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may
not play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all
or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc
with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not
be played back at all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may
not play back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read
it correctly.
*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region
format can only be played back on unit with the same region code.
DVD-Video
* 1,2,4,6,
10,11
* 4,6,10
* 1,3,4,5,
6,7,9,10
DVD-RW
DVD-R
* 1,3,4,5,6,8,9,10
DVD+RW
DVD+R
Audio CD
* 4,5,6,9,10
CD-RW
CD-R
Digital
video
(MPEG2)
-
-
-
Digital
audio
Region
code
Mark (logo)
Playable
discs
Recorded
signals
Disc
size
Disc types
12 cm
or
8 cm
12 cm
or
8 cm
Example
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1
Chapter 2
Chapter 3 Chapter 4
Example
Tr ack 1
Tr ack 2
Tr ack 5
Tr ack 6
Tr ack 3 Track 4
or
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3
The sound MAY NOT be heard: Super Audio CD
NOTE:
Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio
CD layer cannot be delivered.
Any other discs without compatibility indications
is a trademark of DVD Format/Logo Licensing Corporation.
PLAYABLE DISCS
UNPLAYABLE DISCS
22
DVD SECTION
T1200UA_EN.QX3 06.2.6 11:16 AM Page 22
SP
GRABACIÓN NORMAL
TV/VCRTV/VCR
1 Utilice [CH.
KK
/
LL
] o los
botones numéricos
para
seleccionar el canal donde se
va a grabar.
NOTA:
Si la unidad está conectada a una caja de cable o
de satélite, deberá estar en CA3 o CA4. Seleccione
en la caja de cable o de satélite el canal donde se
va a grabar.
2 Presione [SPEED] para
seleccionar la velocidad de
cinta deseada (SP/SLP).
(Consulte "SELECTING TAPE
SPEEDS" en página 15.)
3 Presione [REC] para iniciar la
grabación.
4 Presione [PAUSE
FF
] para
interrumpir temporalmente la
grabación de escenas no
deseadas.
Presione
[PAUSE
FF
] de
nuevo o
[REC] para reanudar
la grabación.
NOTA:
Si la grabación se mantiene en pausa durante más
de 5 minutos, la unidad pasará automáticamente al
modo de grabación para que la cinta no sufra daños.
5 Presione [STOP
CC
] para interrumpir la
grabación.
PARAR
REBOBINAR
E
AV RAPIDO
D
EXPULSAR
A
41
ES
REPRODUCCIÓN / GRABACIÓN
NOTAS:
Inserte una cinta de casete con la lengüeta de
protección contra borrado sin quitar.
Esta unidad no puede grabar el contenido del DVD
incorporado.
SOLAMENTE podrá ver el mismo programa de
televisión que se esté grabando.
CA 10
GRABAR
SP
PAUSA
SP
SECCIÓN TV/VCR
REPRODUCIR
B
REPRODUCCIÓN BÁSICA
TV/VCRTV/VCR
1 Inserte una cinta pregrabada para
encender la unidad
automáticamente (Auto Power
On/Actividad automática).
2 Seleccione el modo TV/VCR presionando
[SELECT].
NOTA:
Si se ha quitado la lengüeta de protección contra
borrado, la unidad cambiará en el modo VCR y
empezará la reproducción automáticamente.
3 Para iniciar la reproducción,
presione
[PLAY
BB
].
NOTA:
Incluso en el modo DVD, puede iniciar la reproducción
en videograbadora si presiona [PLAY
BB
] en el panel
frontal (del lateral de TV/VCR).
4
Para interrumpir la reproducción,
presione
[STOP
CC
].
5
Para rebobinar la cinta, presione
[REV
E
].
Para hacer avanzar la cinta,
presione
[FWD
D
].
Para interrumpir el movimiento de
la cinta, presione
[STOP
CC
].
6
Para expulsar la cinta de la unidad,
presione
[STOP/EJECT
C A
] en el
panel frontal.
AJUSTE DE SEGUIMIENTO
El ajuste de seguimiento se establecerá automáticamente
al iniciar la reproducción (función de seguimiento digital).
Si aparecen líneas de ruido (rayas negras y blancas) en la
imagen de reproducción, utilice
[CH.
KK
/
LL
] hasta que las rayas
desaparezcan (ajuste de seguimiento manual). Esto también
está disponible en el modo Pausa/Imagen fija/Cámara lenta.
Para desactivar el modo de seguimiento manual, pare
la cinta una vez e inicie de nuevo la reproducción.
IMAGEN FIJA
Durante la reproducción, presione [PAUSE F]
para congelar la imagen.
Puede avanzar la imagen fotograma a fotograma
presionando repetidamente
[PAUSE F].
Para desactivar el modo de imagen fija, presione [PLAY
BB
].
CÁMARA LENTA
Durante la reproducción, presione [PAUSE F] y, a
continuación presione
[FWDD ].
Para desactivar el modo de cámara lenta, presione [PLAY
BB
].
NOTA:
Si la unidad se mantiene en el modo cámara lenta o imagen fija durante
más de 5 minutos, entrará automáticamente en el modo de parada.
R
EPRODUCCIÓN
G
RABACIÓN
T1200UA_ES.QX3 06.2.6 11:18 AM Page 41
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sylvania 6720FDG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sylvania 6720FDG in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info