: Press the VOL(ume) ▲ or ▼ button.
BRIGHT
Adjust until the darkest parts of the picture are
as bright as you prefer.
[+] : increase brightness [-] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast [ -] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color [ -] : be pale color
TINT
Adjust to obtain natural skin tones.
[+] : greenish tone [ -] : reddish tone
SHARPNESS
Adjust to detail in the picture.
[+]:increase sharpness [-]:decrease sharpness
Notes:
● “+” is achieved by pressing the VOL(ume)
▲ button and “-” by pressing the
VOL(ume)▼ button.
●
In the above steps, the picture adjustment
display will disappear from the TV screen
automatically after about 10 seconds if you
do not press any buttons. Press the MENU
and VOL(ume) ▲ button so that
“PICTURE” is selected. Press the CH(annel)
▲ or ▼ button repeatedly until the display
returns to the screen.
●
If you adjust another picture control after
you set the Game mode to [ON], the Game
mode will be set to [OFF] automatically.
[USING THE GAME BUTTON]
You may also set Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. “GAME”
appears on the TV screen.
●
To exit Game mode and external input
mode, press the INPUT SELECT button.
●
To cancel the Game mode only, follow the
steps in PICTURE ADJUSTMENT or AV
MEMORY. In this case, “VIDEO2” (external
input mode) instead of “GAME” appears on
the TV screen.
●
If you press the GAME button when the TV
is off, the TV turns on and will be in Game
mode and external input mode automatically.
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that “PICTURE” is selected.
3) Press the CH(annel) ▲ or ▼ button to select “MANUAL”. Then, press the VOL(ume) ▲ button.
4) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the
VOL(ume) ▲ or ▼ button.
: Press the CH(annel) ▲ or ▼ button.
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the proce-
dure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▲ or ▼ button to point to “[ENG]”.
5) Select “ENG(lish)”, “ESP(añol)” or “FRA(nçais)” by using
the VOL(ume) ▲ or ▼ button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TV screen.
3) Press the CH(annel) ▲ or ▼ button to point to “CHANNEL SET”, then
press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to “AUTO PRESET CH”,
then press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
● The TV distinguishes between standard TV channels and cable (CATV)
channels.
● When AUTO PRESET CH action is completed, the lowest memorized
channel reappears on the screen.
● When you press the CH(annel) ▲ or ▼ button after selecting “AUTO PRESET CH”,
the tuner will stop at the memorized channels only.
● The TV may recognize TV channels to be CATV channels by receiving conditions. In this case,
try AUTO PRESET CH action again in the fine receiving conditions.
● When AUTO PRESET CH is activated where there is no TV signal input, “NO TV SIGNALS”
will appear on the display after the completion of channel scanning.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to “CHANNEL SET”, then
press the VOL(ume) ▲ button.
3) Press the VOL(ume) ▲ button so that “ADD/DELETE” is selected.
4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put
into memory or to erase from memory.
Note: The menu will disappear automatically in about 10 seconds.
Perform ADD/DELETE function while this display appears on the screen.
●
Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
●
Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) SYSTEM
You can listen to a program in MTS stereo by following the steps below.
[To Select STEREO, MONO or SAP in Stereo broadcast]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point to “TV SOUND”.
3) Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode.
([MAIN], [MONO] or [SAP].)
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
: Press the VOL(ume) ▲ or ▼ button.
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until “SLEEP 0” is displayed.
You may view specially labeled (cc) TV pro-
grams, movies, news and prerecorded tapes,
etc. with either a dialogue caption or text dis-
play added to the program.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to “CAPTION”.
3) Press the VOL(ume) ▲ or ▼ button to
select the mode you wish.
4) When done, press the MENU button to exit
the menu.
AV MEMORY
This feature allows you to quickly adjust picture settings for MANUAL, SPORT, NEWS,
MOVIE, and GAME to match the program you are watching.
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that “PICTURE” is selected.
3) Select the item with the CH(annel) ▲ or ▼ button.
Note: See PICTURE ADJUSTMENT to manually customize the picture.
