Manual Sylvania 6427TEL (page 4 of 8) (English)

11849

Zoom out

Zoom in

1/8

[MPAA RATING SET UP]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) ▲ or ▼ button to point to “V-CHIP SET UP”.

Then, press the VOL(ume) ▲ button.

3) Use the number buttons to enter 4-digit access code. The default access

code is 0000. If you have not set up your personal access code, you should

use 0000.

4 Press the CH(annel) ▲ or ▼ button to point to “MPAA RATING”.

Then press the VOL(ume) ▲ button.

5) Press the CH(annel) ▲ or ▼ button to point to your desired item.

Then press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].

●

When you select the rating category and set it to [BLOCK], the higher rat-

ing will change to [BLOCK] automatically. Also, the lower rating will

change to [VIEW] automatically.

●

When you set “G” to [BLOCK] or [VIEW], then all ratings will change to

[BLOCK] or [VIEW] automatically.

●

When you set “X” to [VIEW], the all ratings will change to [VIEW] automatically.

6) Press the MENU button to exit the menu.

[TV RATING SET UP]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) ▲ or ▼ button to point to “V-CHIP SET UP”.

Then, press the VOL(ume) ▲ button.

3) Use the number buttons to enter 4-digit access code. The default access

code is 0000. If you have not set up your personal access code, you should

use 0000.

4) Press the CH(annel) ▲ or ▼ button to point to “TV RATING”.

Then press the VOL(ume) ▲ button.

5) Press the CH(annel) ▲ or ▼ button to point to your desired item.

Then press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].

●

When you select the rating category and set it to [BLOCK], the higher rat-

ing will change to [BLOCK] automatically. Also, the lower rating will

change to [VIEW] automatically.

●

When you set “TV-Y” to [BLOCK] or [VIEW], then all ratings will change to [BLOCK] or

[VIEW] automatically.

●

When you set “TV-MA” to [VIEW], then all ratings will change to [VIEW] automatically.

●

V-CHIP SET UP SUB RATINGS

When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) ▲ button, the

sub-ratings will appear on the TV screen.

If you select the rating category (example: TV-PG) and set it to [BLOCK] or

[VIEW], the sub-ratings (example: V for Violence) will change to [BLOCK]

or [VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW] individually when the

rating category is set to [BLOCK]. To set the sub-ratings individually, follow

the steps below.

●

When you select [TV-Y7]:

Press the CH(annel) ▲ or ▼ button to select “FV” (Fantasy Violence).

Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].

●

When you select [TV-PG], [TV-14] or [TV-MA]:

Press the CH(annel) ▲ or ▼ button to select “D”(Suggestive Dialog),

“L”(Coarse Language), “S”(Sexual Situation), or “V”(Violence).

Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].

Note: When you select [TV-MA], “D” does not appear on the TV screen.

●

The sub-ratings which set to [BLOCK] appear next to the rating category in

the TV RATING menu.

6) Press the MENU button to exit the menu.

[V-CHIP ACCESS CODE]

To change access code, follow steps.

1) Press the MENU button, then press the CH(annel) ▲ or ▼ button to select

V-CHIP SET UP. Press the VOL(ume) ▲ button to continue.

2) Press the number buttons to enter your old access code. If you have never

set up your personal access code, use 0000.

3) Press the CH(annel) ▲ or ▼ button to select CHANGE CODE. Then, press

the VOL(ume) ▲ button to continue.

4) Use the number buttons to enter your desired access code in the NEW

CODE space. Then, enter the same code in the CONFIRM CODE space.

Your new access code is set. You will return to the “V-CHIP SET UP”.

If the code in the CONFIRM CODE space does not match the code in the

NEW CODE space, repeat step 4, making sure you enter the same new code

exactly in the CONFIRM CODE space.

Notes:

• If a power failure occurs, the default code, 0000 will be the access code.

• If you connect the power cord to an AC outlet that is controlled by a wall

switch, your personal access code will be erased every time you turn off

the power at the wall switch. The default code will return to 0000.

[IF YOU FORGET YOUR ACCESS CODE]

You should restore the access code to 0000 as your access code, unplug the

TV’s power cord for 10 seconds, then plug it in again.

PICTURE

CHANNEL SET

[ENGLISH] ESPAÑOL

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

GENERAL SPECIFICATIONS

Television system: NTSC-M

TV Standard

Closed Caption

System: §15.119/FCC

Channel coverage

VHF: 2 ~ 13

UHF: 14 ~ 69

CATV: 2 ~ 13, A ~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A

Tuning System 181 channel

frequency synthesized

tuning system

Channel access: Direct access keyboard,

programmable

scan and up/down

Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced

(F-type)

Video input: RCA connector x 2

(1 x Front / 1 x Rear)

Audio input: RCA connector x 4

(2 (L/R) x Front / 2 (L/R) x Rear)

Headphone: 1/8" stereo (3.5mm)

Stereo Sound System

2 speakers

ELECTRICAL SPECIFICATIONS

Sound output: 1W, 8 ohm x2

OTHER SPECIFICATIONS

Remote control: Digital encoded

infrared light system

Operating

temperature: 5°C to 40°C

(41°F~104°F)

Power requirements: AC120V, 60Hz

Power consumption

(Maximum): 110W

Picture tube: 27"

Dimensions: H : 22-1/16" (560mm)

W: 26" (660mm)

D: 19-11/16" (500mm)

Weight: 77.2 lbs. (35kg)

•Designs and specifications are subject to

change without notice and without our

legal obligation.

•If there is a discrepancy between languages,

the default language will be English.

Remote control unit

(N0136UD or N0110UD)

Batteries (“AA” x 2)

SPECIFICATIONS

OPERATIONS (Continued)

MAINTENANCE

SUPPLIED ACCESSORIES

TROUBLESHOOTING GUIDE

Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-

looked possibilities. Before arranging for service, check these items. It could save you time and money.

QUICK SERVICE CHECK LIST

PROBLEM

POSSIBLE REMEDY

Remote Control Doesn’t Work

Bars On Screen

Picture Distorted

Picture Rolls Vertically

No Color

Poor Reception on Some Channels

Weak Picture

Lines or Streaks in Picture

Ghosts in picture

Picture Blurred

Sound OK, Picture Poor

Picture OK, Sound Poor

No Picture or Sound

Different color marks on screen

Try a new channel, if OK, then possible station trouble.

Is TV plugged in?

Power at outlet?

Is TV's POWER button on?

Is antenna connected to terminal on the back of the set?

If outside antenna is being used, check for broken wire.

Check for local interference.

Turn off with POWER button and then turn it on after about a minute.

Adjust COLOR control.

Adjust CONTRAST & BRIGHT control.

Check batteries in Remote Control.

Move the TV away from the nearby speakers or appliances which generate a

magnetic field.

Turn off using the POWER button, then turn it on again 30 minutes or so later.

Closed Caption Problem Possible Remedy

My TV is showing captions that are

misspelled.

My TV will not show the text in its entirety

or there is a delay of what is being said.

My captions are scrambled with white

boxes on the TV screen.

My program guide listed a TV show as

being closed captioned

but none of the captions were displayed.

My prerecorded videotape does not show

any captions. The tape box mentions it

being closed captioned.

My TV screen shows a black box on certain

channels.

You are watching a live broadcast and spelling errors made by the

closed captioning production company may pass through uncorrect-

ed. A prerecorded program will not show any misspelled words

because of the normal time available for editing the captions.

Captions that are delayed a few seconds behind the actual dialogue

are common for live broadcasts. Most captioning production compa-

nies can display a dialogue to a maximum of 220 words per minute.

If a dialogue exceeds that rate, selective editing is used to insure that

the captions remain up-to-date with the current TV screen dialogue.

Interference caused by building, power lines, thunderstorms, etc.

may cause scrambled or incomplete captions to appear.

Broadcasters may at times use a time compression process to the

actual program so that additional advertising time can be given.

Since the decoder cannot read the compressed information, captions

will be lost.

The videotape was either an illegal copying or the tape duplicating

company accidentally left out the captioning signals during the

copying process.

You are in the TEXT mode. Select CAPTION mode or CAPTION

[OFF].

As an ENERGY STAR Partner, our company has determined that this product meets

the E

NERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.

Owner’s Manual

(1EMN20220)

CABINET CLEANING

●

Wipe the front panel and other exterior sur-

faces of the TV with a soft cloth immersed

in lukewarm water and wrung dry.

●

Never use a solvent or alcohol. Do not spray

insecticide liquid near the TV. Such chemi-

cals may cause damage and discoloration to

the exposed surfaces.

PICTURE TUBE CLEANING

Wipe the picture tube of the TV with a soft

cloth. Before cleaning the picture tube, discon-

nect the power cord.

• G : General Audience

• PG : Parental Guidance suggested

• PG-13 : Unsuitable for children under 13

• R : Restricted; under 17 requires accompanying parent or adult guardian

• NC-17 : No one under 17 admitted

• X : Mature audience only

• TV-Y : Appropriate for all children

• TV-Y7 : Appropriate for children seven and older

• TV-G : General Audience

• TV-PG : Parental Guidance suggested

• TV-14 : Unsuitable for children under 14

• TV-MA : Mature audience only

TV-Y7

[BLOCK]

TV-PG

[BLOCK]

TV-Y

[VIEW]

TV-Y7 (

)

[VIEW]

TV-G

[BLOCK]

TV-PG

(DLSV)

[BLOCK]

TV-14

(DLSV)

[BLOCK]

TV-MA (

LSV)

[BLOCK]

Owner’s

Manual

PICTURE

CHANNEL SET

[ENGLISH] ESPAÑOL

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

TV-Y

[VIEW]

TV-Y7 (

)

[VIEW]

TV-G

[VIEW]

TV-PG

( )

[VIEW]

TV-14

( )

[VIEW]

TV-MA (

)

[VIEW]

ACCESS CODE

_ _ _ _

TV RATING

MPAA RATING

CHANGE CODE

G [VIEW]

[VIEW]

PG-13

[VIEW]

NC-17

[VIEW]

ACCESS CODE

_ _ _ _

ACCESS CODE

_ _ _ _

PICTURE

CHANNEL SET

[ENGLISH] ESPAÑOL

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

ACCESS CODE

_ _ _ _

TV RATING

MPAA RATING

CHANGE CODE

TV RATING

MPAA RATING

CHANGE CODE

NEW CODE

COMFIRM CODE

_ _ _ _

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sylvania 6427TEL in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sylvania 6427TEL Manual

Product: