Manual Sylvania 6260VF (page 6 of 8) (English)

11697

Zoom out

Zoom in

1/8

- 6 -

9. Recording Features

•Insert a tape with its record tab into the unit.

F.FWD

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

CHANNEL 1 6

REC SPEED – –

STOP

PLAY

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

CHANNEL 1 6

REC SPEED SP

B SP

SLP

F.FWD

PROGRAM NUMBER 1

DATE – – / – –

START TIME – – : – –– –

END TIME – – : – –– –

CHANNEL – –

REC SPEED – –

STOP

PLAY

F.FWD

PROGRAM NUMBER 1

B ONCE

DAILY

WEEKLY

STOP

PLAY

F.FWD

4 Select the desired month.

Select the desired day.

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 0 3 MON

START TIME – – : – –– –

END TIME – – : – –– –

CHANNEL – –

REC SPEED – –

F.FWD

STOP

PLAY

Select an empty program

number.

Select “ONCE”, “DAILY”

(Mon-Fri), or “WEEKLY”.

F.FWD

STOP

5 Select the desired start

time (hour).

Select the

minute

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 10 / 2 4 MON

START TIME 0 7 : 3 0 – –

END TIME – – : – –– –

CHANNEL – –

REC SPEED – –

F.FWD

STOP

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 4 MON

START TIME 0 7 : 3 0 PM

END TIME – – : – –– –

CHANNEL – –

REC SPEED – –

B PM

STOP

PLAY

F.FWD

Select “AM” or “PM”.

Repeat the procedure in steps

5 and 6 to set the end time.

Select the desired channel.

Select the desired recording speed.

Turn off the

VCR for

recording

• TIMER indicator on the VCR lights up.

C.RESET

EXIT

POWER

Warning: Unauthorized recordings of copyrighted video tapes

may be an infringement of copyright laws.

ANT

OUT

AUDIO

VIDEO

OUT IN

OUT

ANT

OUT

AUDIO

VIDEO

OUT IN

OUT

ANT

OUT

AUDIO

VIDEO

OUT IN

OUT

VIDEO

ANT

OUT

AUDIO

OUT IN

OUT

Connect

Audio/Video Cables

(not supplied)

RF Cable

(supplied)

(Back of TV)

(Back of Recording VCR*)

*Front input jacks are also available

(Back of Playing VCR)

Connect

1) Insert a pre-recorded tape into the playing VCR.

2) Insert a tape with its record tab into the recording VCR.

3) Hit

[SPEED] on the remote control of the recording VCR to select the

desired recording speed (SP/SLP).

4) Select the “L1” or “L2” position on the recording VCR.

• To use the input jacks on the back of this unit, select "L1" position by

hitting

[0], [0], [1] on the remote control or [CHANNEL ].

• To use the input jacks on the front of this unit, select "L2" position by

hitting

[0], [0], [2] on the remote control or [CHANNEL ].

5) Hit

[REC/OTR] on the recording VCR.

6) Begin playback of the tape in the playing VCR.

7) To stop recording, hit

[STOP/EJECT

] on the recording VCR,

then stop playback of the tape in the playing VCR.

1) Turn the power on by hitting

[POWER].

2) Select main menu by hitting

[MENU].

3) Select "TIMER PROGRAM-

MING" by pressing [PLAY

] or

[STOP

]. Then, hit

[F.FWD

4) Select the program number

which you want to check by

pressing [PLAY

] or

[STOP

]. The details of the

program you selected will

appear on the TV screen.

• Go to the digit you want to

change by pressing

[F.FWD

] or [REW

Then, enter correct numbers by

pressing [PLAY

] or

[STOP

• You may cancel the entire pro-

gram by hitting [REW

] while

the program number flashes.

5) Hit [C.RESET/EXIT] to exit.

6) Hit [POWER] to return to timer

stand-by mode.

To Check, Correct, or Cancel a

Timer Program

Hint

• To go back one step, hit [REW

] (during

steps 3) to 9) ).

• If there is a power failure or the unit has been unplugged for more than 30 sec-

onds, the clock setting and all timer settings will be lost.

• If the tape runs out before the end time, the unit will switch to the Stop mode

immediately, eject the tape and the power will be turned off. The TIMER indicator

will flash.

• If a tape is not in the unit or does not have the record tab, the TIMER indicator

flashes and timer recording cannot be performed. Please insert a recordable tape.

• When all the Timer Recording are completed, the TIMER indicator flashes.

To play or eject the recorded tape, hit [POWER] first, and then press

[PLAY

] or [EJECT

Hit [STOP/EJECT

] on the unit.

To cancel a Timer Recording that is in progress

Hint

• For best results during dubbing, use the VCR’s front panel controls whenever possible. The

remote control might affect the playing VCR’s operation.

• Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are

not recommended.

• You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs.

• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

• "L2" input jacks are on the front of this unit.

Timer Recording Hints for Timer Recording

Copying a Video Tape

•

If you have connected the unit to a cable

box or satellite box as the Connection on

page 1, select the VCR to channel 3 or 4

(the RF output channel of the VCR).

Then, select the desired channel at the

cable box or satellite box. Leave the cable

box or satellite box on for timer recording.

PLAY

• You can program one

year in advance.

PLAY

STOP

PLAY

STOP

PLAY

- M E N U -

B TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO [ON]

SAP

TIMER PROGRAMMING

PROG 12345678

DATE

START TIME

END TIME

CHANNEL

Available program

number flashes.

HJ411UD.QX33 05.3.8 13:09 Page 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sylvania 6260VF in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sylvania 6260VF Manual

Product: