565041
75
Zoom out
Zoom in
Previous page
1/176
Next page
75
10. Menu “INSTALL SETTINGS”
Brie y push the “MENU” button (4) as described in chapter
8. b). The bottom-most display line shows “USER SETTINGS“.
Use the “–” (3) and “+” (2) buttons to switch between “USER
SETTINGS” and “INSTALL SETTINGS”.
Select “INSTALL SETTINGS” and push the button „OK“ (5).
Then the buttons –” (3) and “+” (2) can be used to select the de-
sired function (see following subchapters or short description
in chapter 8. b).
• Con rm the selection with “OK” (5).
If you want to leave a function or the setting menu, push
the button „MENU“ (4).
a) Function H1 “HEAT OR COOL”
The setting of this function divides on whether the room thermo-
stat is operated in connection with a heating or cooling device.
Depending on the selected operating mode (“HEAD”, “COOL”),
the respective relay is switched at the terminal clamps socket
COM1/NC1/NO1 or COM2/NC2/NO2 when the measured tempera-
ture exceeds or undercuts the value in the programming (as of
which difference depending on the hysteresis setting).
• “HEAT” = Heating mode
The consumer is activated when the measured temperature is
below the value programmed.
Use this operating mode when the you want to control a heat-
ing.
• “COOL” = cooling mode
The consumer is activated when the measured temperature is
above the value programmed.
Use this operating mode when the you want to control a cool-
ing device/fan.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sygonix TX 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix TX 5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info