Manual Sygonix TX 5 (page 71 of 176) (English, German, Dutch, French)

565041

Zoom out

Zoom in

1/176

j) Function G10 “SWING SETTING”

To prevent the connected consumer from switch on/off too often,

the hysteresis can be set in the function G10.

The consumer is only activated when a speciﬁ c deviation from

the target temperature is exceeded or undercut (depending on

operating mode H1 (“HEAT OR COOL”).

• Heating mode (“HEAT”)

Example:

Hysteresis = 0.5 °C, programmed temperature = +20.0 °C

Consumer is activated at <= +19.5 °C

Consumer is deactivated at >= +20.5 °C

• Cooling mode (“COOL”)

Example:

Hysteresis = 0.5 °C, programmed temperature = +20.0 °C

Consumer is activated at <= +20.5 °C

Consumer is deactivated at >= +19.5 °C

Proceed as follows:

1. After selecting this function G10 “SWING SETTING” and con-

ﬁ rming with “OK” (5), the temperature value for setting the

hysteresis ﬂ ashes (basic setting is 0.5 °C).

2. Set the hysteresis value (0.2 °C....2.0 °C) with the buttons “–”

(3) and “+” (2).

3. Conﬁ rm the setting with “OK” (5).

The room thermostat is then in the previous menu for selec-

tion of functions again.

To leave the menu and return to the regular display, push the

button “MENU” (4), repeatedly if required.

Observe that a low hysteresis value leads to very fre-

quent activation/deactivation of the consumer!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix TX 5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sygonix TX 5 Manual

Product: