565041
53
Zoom out
Zoom in
Previous page
1/176
Next page
53
Ensure that the line wires are not stripped too far when con-
necting them. This would cause short circuit.
As already described in the connection chart, observe that a
heater is connected to the terminals COM1 and NO1 and/or a
cooler to terminals COM2 and NO2.
After commissioning, the setting menu must be selected de-
pending on the connected device of the heating or cooling
mode.
It is also possible to connect a heater and a cooler at once. This
permits operation of the room thermostat in heating more in
winter (an electrical heater is activated/deactivated tempera-
ture-controlled) and switching to cooling mode in summer (e.g.
a fan is activated/deactivated temperature-controlled).
Operation of a concurrently connected heater and cooler
is only possible alternatingly, depending on which oper-
ating mode (“HEAT” = heating mode, “COOL” = cooling
mode) you have chosen in the setting menu.
The cooler does not work in heating mode; the heater
does not work in cooling mode.
If you want to connect an external temperature sensor
(not enclosed but available as an accessory), the polarity is ines-
sential for connection.
Place the cables so that they are not crushed or damaged by
sharp edges.
Place the assembly plate, e.g.on the concealed socket and at-
tach them with two suitable screws.
Observe that the contact tabs (8) point up and the screws (10)
down.
Check for tight t of the assembly plate.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sygonix TX 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix TX 5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info