Manual Sygonix Touch IP65 (page 37 of 80) (English, German, Dutch, French)

647166

Zoom out

Zoom in

1/80

9. Operation

• The relay must be in regular operation (red LED lit) and not in programming

mode (yellow LED lit).

• After input of the correct user code, the relay is activated for the programmed

time (see chapter 8. e) and the green LED is lit.

After this time, the relay is deactivated again. The green LED goes out.

If you have set a time of „00“ seconds in chapter 8. e), the relay remains active

until you enter a correct user code again.

• If a switching code is programmed, the relay is activated permanently when a

switching code is entered (see chapter 8. i).

Input of the correct user code will not have any effect now. Only when the

switching code is entered again will the relay be deactivated.

• All data is retained when the power supply fails.

After return of the operating power, the left LED ashes alternatingly yellow

and red, the right one ashes green.

After a few seconds, the code lock emits 3 sound signals and the left LED

lights up red (the right, green, LED goes out).

The code lock is then ready for use once again.

We recommend using a redundant power supply for the door lock, so that the

operating voltage (12 V/DC) continues to be present, e.g. through a recharge-

able battery, if power fails; The same applies, of course, for any alarm system

that may be present.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix Touch IP65 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sygonix Touch IP65 Manual

Product: