Manual Sygonix SY-3561086 (page 59 of 64) (English, German, Dutch, French)

707205

Zoom out

Zoom in

1/64

b) Power adapter/mains voltage

• The design of the plug-in power adapter complies with IEC Protection Class II

(double insulated electrical appliances). Use only a standard mains socket as the

power source for the power adapter.

• The power socket into which the power adapter is inserted must be easily ac-

cessible.

• Use only the power adapter supplied to power the digital recorder.

• Do not pull the AC adapter from the mains socket by pulling on the cable.

• Never touch a power adapter that shows signs of damage, as this could cause a

fatal electric shock!

First, switch off the mains voltage to the socket to which the wall plug transformer

is connected (switch off at the corresponding circuit breaker or, for example, re-

move the safety fuse or switch off at the corresponding RCD protective switch, so

that the socket is fully disconnected).

You can then unplug the power adapter from the mains socket. Dispose of the

faulty power adapter in an environmentally friendly way, do not use it any more.

Replace it with a power adapter of the same design.

c) Operation

• The product is not a toy. Devices operated on mains voltage should not be used by

children. Therefore, be especially careful when children are around.

Use the product where it is out of the reach of children.

• The product is intended for use in dry indoor rooms only; it must not get damp or

wet; never touch it with damp wet hands! Power adapters pose the potential risk

of a fatal electric shock!

• The product should not be exposed to extreme temperatures, direct sunlight, in-

tense vibrations or heavy mechanical stress. Protect it against dust and dirt.

• Never use the product immediately after moving it from a cold room into a warm

one. The condensation that forms might destroy the product. A power adapter also

carries the risk of a potentially fatal electric shock!

• Allow the product to reach room temperature before connecting it to the power

supply and putting it into use. In some cases, this may take several hours.

• Avoid the following adverse conditions at the location of installation and during

transport:

- Dustorammablegases,fumesorsolvents

- Strong vibrations, impacts or blows

- Strongmagneticeldssuchasthosefoundclosetomachineryorloudspeakers

• Safe operation can no longer be assumed if:

- the product exhibits visible damage,

- the device no longer works

- the device was stored for a long period of time in unfavourable conditions

- it was exposed to heavy loads during transport

• When setting up and operating the product, ensure that the cables are neither

bent nor squeezed.

• Handle the product with care; it can be damaged by impacts, blows or falls even

from a low height.

• Disconnect the power supply from the power socket if the product will not be used

for a while (e.g. storage).

Installation of a SATA Hard Drive

Before you open the digital recorder and install a hard disk, disconnect the digital

recorder from the power supply; Unplug the power supply from the wall outlet..

• First remove the casing lid of the digital recorder by unscrewing its retaining screws (one

screw each on the left and right and 2 screws on the rear side).

• A 8.89 cm / 3.5“ SATA hard drive is suitable for installation (not included). For use as surveil-

lance device, you have to install a hard drive that can be used in continuous operation. These

are usually more expensive than „normal“ hard drives.

Some manufacturers of hard drives offer hard drives that are specially designed for surveil-

lance systems.

Do not install a conventional desktop hard drive into the digital recorder as it will age

faster or read/write errors may occur when the hard drives is used in continuous

operation.

Ensure also that the hard disk used will not generate heat as the digital recorder has

no integrated fan.

• Attach the hard drive to the digital recorder by the recorder‘s mounting holes intended for this

purpose and 4 screws.

• Connect the power cord and the SATA cable between the hard drive and the digital recorder‘s

control board.

• Replace the casing lid of the digital recorder and fasten it with the screws removed earlier

in this step.

Quick guide

4-channel AHD digital recorder

Item no. 1629427

Intended Use

The digital recorder is intended for recording and monitoring the images of up to four connected

cameras (not included, can be ordered separately). The device is operated via USB mouse and

with an intuitive OSD menu.

The digital recorder is particularly suitable for AHD, CVI, TVI, IP cameras. The images are

recorded onto a SATA hard drive (not included in the delivery, to be ordered separately).

For safety and approval reasons, you may not convert and/or alter the product. If you use the

product for purposes other than those described above, the product may be damaged. Moreo-

ver,theimproperuseinvolvesriskssuchasshort-circuits,re,electricshocks,etc.Pleaseread

the operating instructions carefully and do not discard them. If you pass the product on to a third

party, please hand over these operating instructions as well.

This product complies with the applicable national and European regulations. All names of

HDMI is a registered trademark of HDMI Licensing L.L.C.

Package contents

• Digital recorder

• 4xxingscrewforharddrive

• USB mouse

• Power adapter

• Software CD (with software and manufacturer‘s English and German instruction manual

• Quick guide

Up-to-date operating instructions

Download the latest operating instructions via the link

www.conrad.com/downloads or scan the QR code.

Follow the instructions on the websit

Explanation of Symbols

The lightning symbol inside a triangle is intended to alert you of health hazards, e. g.,

risk of electrical shock.

An exclamation mark in a triangle indicates important instructions in this operating

manual which must be adhered to.

 Thearrowsymbolisusedwhenspecictipsandinformationontheoperationare

provided.

Observe the operating instructions!

Safety Instructions

Please read the operating instructions carefully and pay particular attention to

the safety instructions. We do not assume liability for injuries/material damag-

es resulting from failure to observe the safety instructions and the information

in these operating instructions regarding the proper handling of the product.

Furthermore, in such cases, the warranty/guarantee will be null and void.

a) General

• Theunauthorisedconversionand/ormodicationoftheproductisnotallowedfor

safety and approval reasons.

• If the digital recorder is used with other devices (e.g. a monitor and surveillance

cameras), the operating instructions and safety notices for these devices must

be followed.

• Any maintenance or repair work may be performed only by an expert.

• Do not leave the packaging material unattended, since it could become a dange-

rous plaything for children.

• On industrial sites, the accident prevention regulations of the association of the

industrial workers‘ society for electrical equipment and utilities must be followed.

• If you have any questions that are not answered in this manual, please contact our

technical service or another specialist.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix SY-3561086 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sygonix SY-3561086 Manual

Product: