Manual Sygonix HT100 (page 2 of 2) (English)

615358

Zoom out

Zoom in

1/2

Here any temperature for a selected time period can be set. Press button, set the time

for which the timer program is to be overridden. Confirm with OK. Set the desired temperature.

Confirm with OK. A manual temperature change is then in the given period not possible,

the setting wheel is locked. By pressing the Menu button, the lock-up can be released.

Setting Holidays

First set the date of the re-start of the

regular heating time. (Set the end of the

holiday)

Select temperature

Setting Offset

keylock

Timer function

Room temperature adjustment. Here you

have the possibility to set a temperature

of (-5 / + 5 °). The temperature determined

by the instrument may differ from the

perceived temperature by the user.

In this case, the temperature determined

by the instrument must be adjusted.

Dismantling

In order to disassemble the Radiator Thermostat HT100 set to position ON, for this turn the

setting wheel beyond the highest temperature of 28 C° until ON appears in the display. Wait

briefly before loosening the screw connection. Then pull off the Radiator Thermostat HT100

from the valve.

Declaration of Conformity

Hereby, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau

declares, that this product is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC. The Declaration of

Conformity for this product can be found at www.conrad.com

Guarantee

For damages caused by failure to observe this Instruction Manual, the warranty/guarantee

is voided! For consequential damages we assume no liability! For material or personal dam-

age caused by improper handling or failure to observe the safety information, we assume

no liability! In such cases, the warranty/guarantee is voided!

sygonix®

distributed by

Conrad Electronic SE

Klaus-Conrad-Str. 1

D-92240 Hirschau

Technical Specifications

Power supply: 2 AA batteries / Mignon

Factory settings: Comfort temperature: 21 ° C

Economy temperature: 16 ° C

1. Heating time: Start 7:00 o’clock

1. Economy Time: Start 22:00 o’clock

Switching points: 4 heating times, 4 economy times

Frost protection function: Yes, activation at temperature below +6 ° C

Calcification protection: Yes, valve movement 1x per week

Window function: Yes

Modes: Automatic / Manual

Dimensions: 80 x 70 x 52 mm (W x H x D)

www.sygonix.com

Hilfe

1. 2.

MENU URLA

MENU OFFS

Problem Cause Solution

Batteries are low Change batteries

Radiator is

not getting

warm.

Boiler water temperature O.K.?

Valve does not open, after

Summer heating pause-

calcified?

Correct water temperature of the

boiler

Take off Radiator Thermostat HT100

Move by hand the valve tappets back

and forth several times.

Radiator is

not cooling

down.

Valve does not close completely.

Possibly the closing point of your

your valve seat has moved.

EAdapt again (see “Adaptation”)

Repeatedly move valve tappets by

hand - perhaps an adaptation is not

possible because your valve may be

calcified, or the seal does no longer

fulfill its function.

Thrust piece

falls out.

(This may also

cause an E1

error!)

Due to an endless thread

the thrust piece mounted on

the bottom may fall out when

the controller was not applied

on the valve.

Insert thrust piece. Adapt the

device via the

MEN

point, or by

removing and re-inserting the

batteries. Now, the endless threat

rotates and tightens the thrust

piece firmly. Attach to the radiator

and adapt again.

E1-E3

By pressing any button the fault indicator

disappears from the display and the adaptation restarts!

No adaptation possible.

Radiator Thermostat HT100 not

mounted on radiators.

s the device correctly mounted on

the radiator?

Mount Radiator Thermostat HT100.

Valve lift too short or

Battery power too weak.

Open and close valve tappets by

hand several times or install new

batteries.

No valve movement possible. Do valve tappets move freely?

Hold both buttons

for several seconds.

Activate key lock.

To deactivate, hold the

two buttons pressed

for several seconds.

LED

The LED lights up in each case

during the heating-phase until

the set temperature is reached.

PROG

Monday

Set the beginning

of the 1. Heating Time

Setting Individual Program

Set the beginning

of the 1. Economy Time

You can optionally enter additional heating and economy periods. If you do not want to

make any further settings, confirm the display „–– ––“with OK.

DAY1

Day/

Block

Maintenance and Cleaning

Maintenance or repair may only be performed by a specialist or specialist workshop. There are

no serviceable components for you inside the product, therefore, never open/disassemble it

(except for the battery change as described in this manual). Never use aggressive cleaning

agents, rubbing alcohol or other chemical solutions as they may cause damage to the

housing or even impair its operational functions.

Advice on environmental protection:

From the date of implementation of European guidelines 2002/96/EC and

2006/66/EC, into national law, the following applies: Electric and electronic

devices and batteries may not be disposed of in household waste. The consumer

is obliged to return electric and electronic devices and batteries to the public

collection points established for them or to the point of sale. The particulars

of this are regulated by the applicable state laws. The symbol on the product, operation

instructions or packaging points to these provisions. You make an important contribution

to the protection of the environment by reusing or recycling old equipment/batteries or

making use of them in other ways.

D1-5 Mo-Fr

D1-6 Mo-Sa

D1-7 Mo-Su

The process can be terminated prematurely

by pressing the MENU button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix HT100 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sygonix HT100

Sygonix HT100 User Manual - German - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sygonix HT100 Manual

Product: