703919
19
Zoom out
Zoom in
Previous page
1/40
Next page
19
2. Take the brushes out of their brackets: Small arrow marks
are located on the brush ends. If you push a brush to-
wards the mark it can be removed from the bracket.
3. Remove any dust and dirt from the brushes and the clean-
ing head. If necessary, you can wipe off all parts of the
device with a dry or damp, lint-free cloth.
4. After cleaning, put the cleaning brushes back in the brack-
ets. To do so, rst insert the brush end with the arrow mark
in the bracket, apply pressure and place the other brush
end in the second bracket.
5. Place the cover back on the cleaning head and se-
cure it by pushing the latches away from one another.
ATTENTION: A small magnet is located on both the bot-
tom pole section and the cover. When inserting the cover,
make sure that both magnets are aligned with one another.
6. Stow the device, the charger and the rechargeable battery in a dry, frost-free area
that is not accessible to children or animals.
For space-saving storage, you can fold the side of the cleaning head (where the
magnet is located) up to the pole.
Troubleshooting
If the device is not working properly, please check whether you are able to rectify the
problem yourself rst. Otherwise contact customer service. Do not attempt to repair a
defective device yourself!
Problem Possible cause/solution
The device only
operates slowly or
doesn’t start.
Is the storage battery empty? Charge it.
Has the rechargeable battery been inserted so that it locks into
the battery compartment?
Are the bottom pole section and the pole section of the
cleaning head properly connected?
The storage
battery is not
charged.
Make sure that the rechargeable battery has been properly
inserted in the charger.
Is the charger properly connected with the socket?
Is the socket defective? Try another socket.
Check the fuse for your mains connection.
The device is
running, but is not
collecting any dirt.
Check whether the dust bin is full and if necessary, empty it.
Some debris may be caught in the carpet oor or may be too
large/too heavy for the device to remove.
The device is
losing dirt and
debris during the
cleaning process.
Make sure that the dust bin is empty and securely closed.
Check whether any debris is caught in the rotating cleaning
brushes and remove it.
19


Need help? Post your question in this forum.

Forumrules
1

Forum

swivel-sweeper-br-sdj01e---z08776

Reset search

  • Need one of these motors for replacement on swivel sweeper
    RS380S 7.2v DC20W
    BR-SDJ01E 7.sV dc/20W 5119 J1 Submitted on 9-10-2020 at 20:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swivel Sweeper BR-SDJ01E - Z08776 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swivel Sweeper BR-SDJ01E - Z08776 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info