Manual Switel WTF727 (page 65 of 76) (English, German, French, Italian)

687898

Zoom out

Zoom in

1/76

Operating the Walkie−Talkies

2 x M Activate programming mode

X/Y, P Select the code and confirm it

An exception here is code 0 (zero). In the case of this

setting, all the calls on the set channel can be heard re-

gardless of the CTCSS/CDCSS code. To be able to

participate in the radio communication, it may be

necessary to set the necessary CTCSS/CDCSS code.

If you want to communicate with the walkie−talkies which are not

using a CTCSS/CDCSS code, you must select CTCSS/CDCSS

code 0" (zero) on your walkie−talkie.

Scanning for a channel

Signals are searched for in the eight channels in a continuous

cycle. The

icon appears in the display. If an active channel

is detected, the channel scan stops. The Ready LED flashes ev-

ery second. Press the P button to enable radio communica-

tion. If the P button is not pressed, channel scan resumes

after five seconds.

Start/End global channel scanning

To execute a global channel scan", set the CTCSS/CDCSS code

of the output channel to 0 (zero). The scanning routine stops at

every channel on which a signal is received, regardless of the

code transmitted with the signal.

N Start/End channel scanning

The output channel is the channel which is set when the

channel scan is activated.

Start/End specific channel scanning

To execute a specific channel scan", set the CTCSS/CDCSS

code for each channel to an individual value.

The scanning routine only stops when a signal is received on a

channel that matches the value set.

N Start/End channel scanning

If a certain channel should be scanned fully during a

specific channel scan", the code must be set to 0 (zero)

for this channel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Switel WTF727 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Switel WTF727 Manual

Product: