687865

Switel WTC516 Manual

37
Zoom out
Zoom in
Previous page
1/41
Next page
Operating the Walkie−Talkies
37
If you want to communicate with the walkie−talkies which are not using a CTCSS,
you must select CTCSS code 0" on your walkie−talkie.
Each CTCSS code complies to a specific tone frequency transmitted by
the walkie−talkie. Communication between the subscribers is only then
possible when both parties are using the same channel and CTCSS
code. An exception is CTCSS code 0". In the case of this setting, all the
calls on the set channel can be heard regardless of the CTCSS code. To
be able to participate in the radio communication, it may be necessary
to switch from CTCSS code 0" to the CTCSS code being used.
Searching for a channel
Signals are searched for in the eight channels in a continuous cycle. SCAN ap-
pears in the display. If an active channel is found, press the t button to par-
ticipate in the radio communication. If the t button is not pressed, channel
search resumes after a short time.
Starting channel search
¤+X Start the channel search
When a channel is found, press the Y button immediately. This initiates the
search for the CTCSS code.
Resuming search for a channel
X The channel search is resumed
Stopping channel search
t The channel search is stopped
Transmitting ringing tones
The ringing tones indicate to other subscribers that you want to talk to them.
Transmit ringing tones
Monitor
The Monitor function enables the search for weak signals on the channel cur-
rently set.
¤+Y Monitor the channel
t End the monitoring function
Key lock
The key lock function prevents inadvertent modification of settings. When the key
lock function is activated, the
− icon appears in the display.
a, Activate/Deactivate the key lock
VOX (handsfree)
When your voice or another noise is detected by the microphone when VOX
mode is active, the walkie−talkie automatically starts to transmit after a short
delay. It is not necessary to press the t button. When VOX mode is active,
VOX appears in the display.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel WTC516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel WTC516 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info