Manual Switel WTC500 (page 53 of 60) (English, German, French, Italian)

687863

Zoom out

Zoom in

1/60

Operating the Walkie−Talkies

Selecting a channel

, [

], ,  Select the channel and confirm

Channel Frequency (MHz) Channel Frequency (MHz)

1 446.00625 5 446.05625

2 446.01875 6 446.06875

3 446.03125 7 446.08125

4 446.04375 8 446.09375

Selecting the CTCSS code

All the calls on walkie−talkies which occur within the range of recep-

tion are signalled. A condition for this is that all the walkie−talkies

are set to the same channel. To prevent mutual interference, a

CTCSS code can be defined for the set channel.

, , [

], , Select the CTCSS code and

 confirm the selection

Each CTCSS code complies to a specific audio frequency

transmitted by the walkie−talkie. Communication between

the subscribers is only then possible when both parties are

using the same channel and CTCSS code. An exception

is CTCSS code 0". In the case of this setting, all the calls

on the set channel can be heard regardless of the CTCSS

code. To be able to participate in the radio communication,

it may be necessary to switch from CTCSS code 0" to the

CTCSS code being used.

If you want to communicate with the walkie−talkies which are not

using a CTCSS code, you must select CTCSS code 0" on your

walkie−talkie.

Searching for a channel

Signals are searched for in the eight channels in a continuous

cycle. The

icon appears in the display. If an active channel is

detected, the channel search stops. The Ready LED flashes once

per second. Press the  button to enable radio communication.

If the  button is not pressed, channel search resumes after five

seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Switel WTC500 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Switel WTC500 Manual

Product: